manualshive.com logo in svg

Cisco Aironet 350 Series, Administration Manual

The Cisco Aironet 350 Series is a cutting-edge wireless access point that offers seamless connectivity. To swiftly set it up, you can easily access the free Quick Start Manual available for download at our website. This comprehensive manual provides step-by-step instructions and guidelines to optimize your experience with the Cisco Aironet 350 Series.

Share
Download
background image

Administration

System Settings

Cisco 350, 350X and 550X Series Managed Switches, Firmware Release 2.4, ver 0.4

77

6

 

System Settings

To enter system settings:

STEP 1

Click 

Administration

 > 

System Settings

.

STEP  2

View or modify the system settings.

•

System Description

—Displays a description of the device. 

•

System Location

—Enter the physical location of the device.

•

System Contact

—Enter the name of a contact person. 

•

Host Name

—Select the host name of this device. This is used in the prompt of CLI 

commands:

-

Use Default

—The default hostname (System Name) of these switches is: 

switch123456

, where 123456 represents the last three bytes of the device MAC 

address in hex format.

-

User Defined

—Enter the hostname. Use only letters, digits, and hyphens. Host 

names cannot begin or end with a hyphen. No other symbols, punctuation 
characters, or blank spaces are permitted (as specified in RFC1033, 1034, 1035).

•

Custom Banner Settings

—The following banners can be set:

-

Login Banner

—Enter text to display on the Login page before login. Click 

Preview

 

to view the results.

-

Welcome Banner

—Enter text to display on the Login page after login. Click 

Preview

 to view the results.

NOTE

When you define a login banner from the web-based configuration utility, it also 

activates the banner for the CLI interfaces (Console, Telnet, and SSH).

The banner can contain up to 1000 characters. After 510 characters, press <Enter> to 
continue.

STEP  3

Click 

Apply

 to save the values in the Running Configuration file.

Summary of Contents for Aironet 350 Series



























































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Aironet 350 Series

Radicom Research RW8300E-a-PR Quick Start Manual preview
RW8300E-a-PR
Brand: Radicom Research Pages: 9
AES 77-FACPA Quick Start Manual preview
77-FACPA
Brand: AES Pages: 2
NETGEAR Powerline PL1200 Quick Start Manual preview
Powerline PL1200
Brand: NETGEAR Pages: 12
BASETech 1529336 Operating Instructions Manual preview
1529336
Brand: BASETech Pages: 6
Lindy 41038 User Manual preview
41038
Brand: Lindy Pages: 2
Hamlet XUPP25 User Manual preview
XUPP25
Brand: Hamlet Pages: 5
Margi Display-to-Go User Manual preview
Display-to-Go
Brand: Margi Pages: 21
Alpine KCE-400BT Owner'S Manual preview
KCE-400BT
Brand: Alpine Pages: 156
Altinex ShareTime ST100-001 User Manual preview
ShareTime ST100-001
Brand: Altinex Pages: 7
Belkin F5U002 Installation Manual preview
F5U002
Brand: Belkin Pages: 1
Paradyne 6512-A2 Installation Instructions Manual preview
6512-A2
Brand: Paradyne Pages: 36
Danfoss VLT Midi Drive FC 280 Programming Manual preview
VLT Midi Drive FC 280
Brand: Danfoss Pages: 144
BECKWITH ELECTRIC M-2001 Series Application Manual preview
M-2001 Series
Brand: BECKWITH ELECTRIC Pages: 25
Sonnet Tempo Ultra ATA66 Specification preview
Tempo Ultra ATA66
Brand: Sonnet Pages: 2
Sapido PA-1108 User Manual preview
PA-1108
Brand: Sapido Pages: 12
AC Air Technology AC TRACKTECH T1X2 Instruction Manual preview
AC TRACKTECH T1X2
Brand: AC Air Technology Pages: 36
Hioki 9264-01 Instruction Manual preview
9264-01
Brand: Hioki Pages: 2
i-tec C31DTPDHDMI User Manual preview
C31DTPDHDMI
Brand: i-tec Pages: 40

Brands by name

Popular brands

Load more brands