Cisco Aironet 350 Series, Administration Manual

Page: 471 / 762

Security
RADIUS
328 Cisco 350, 350X and 550X Series Managed Switches, Firmware Release 2.4, ver 0.4
17
• Secret Key —Address of switch containing RADIUS client.
- Use default key —For specified servers, the device attempts to authenticate the
RADIUS client by using the existing, default Key String.
- Encrypted —To encrypt communications by using MD5, enter the key in encrypted
form.
- Plaintext —Enter the key string in plaintext mode.
STEP 5
Click Apply . The key for the device is updated in the Running Configuration file.
RADIUS Server Groups
To set up a group of users that will be using the device as its RADIUS server:
STEP 1
Click Security > RADIUS Server > RADIUS Server Groups .
STEP 2
Click Add and enter the following fields:
• Group Name —Enter a name for the group.
• Privilege Level —Enter the management access privilege level of the group.
• Time Range —Check to enable applying a time range to this group.
• Time Range Name —If Time Range is selected, select the time range to be used. Click
Edit to define a time range in the Time Range section. This field is only displayed if a
Time Range was previously created.
• VLAN —Select the VLAN for the users:
- None —No VLAN ID is sent.
- VLAN ID —VLAN ID sent.
- VLAN Name —VLAN name sent
STEP 3
Click Apply . The RADIUS group definition is added to the Running Configuration file of the
device.