manualshive.com logo in svg

Cisco Aironet 350 Series, Administration Manual

The Cisco Aironet 350 Series is a cutting-edge wireless access point that offers seamless connectivity. To swiftly set it up, you can easily access the free Quick Start Manual available for download at our website. This comprehensive manual provides step-by-step instructions and guidelines to optimize your experience with the Cisco Aironet 350 Series.

Share
Download
background image

Administration: Stack Management

Unit Failure in Stack

125

Cisco 350, 350X and 550X Series Managed Switches, Firmware Release 2.4, ver 0.4

8

The following shows what happens when a user-assigned, master-enabled unit with Unit ID 1 
joins a stack that already has a master unit with user-assigned unit ID 1. The newer Unit 1 does 
not join the stack and is shutdown.

User-assigned Master-enabled Unit

Unit Failure in Stack

This section includes the following topics:

•

Failure of Master Unit

•

Master/Backup Switchover

•

Slave Unit Handling

•

Reconnecting the Original Master Unit After Failover

Failure of Master Unit

If the Master fails, the backup unit takes over the master role and continues to operate the stack 
normally. 

For the backup to be able to take the place of the master, both units maintain a warm standby at 
all times. In warm standby, the master and its backup units are synchronized with the static 
configuration (contained in both the Startup and Running configuration files). Backup 
configuration files are not synchronized. The backup configuration file remains on the 
previous master.

Dynamic process-state information, such as the STP state table, dynamically-learned MAC 
addresses, dynamically-learned Smartport types, MAC Multicast tables, LACP, and GVRP are 
not synchronized. 

Summary of Contents for Aironet 350 Series



























































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Aironet 350 Series

Teufel raumfeld one s Setup Manual preview
raumfeld one s
Brand: Teufel Pages: 24
Keysight Technologies N5192A Getting Started Manual preview
N5192A
Brand: Keysight Technologies Pages: 31
Rockwell Automation Allen-Bradley CrossBoard 141C-G Series Installation Instructions preview
Allen-Bradley CrossBoard 141C-G Series
Brand: Rockwell Automation Pages: 4
Hama 00054510 Operating Instructions Manual preview
00054510
Brand: Hama Pages: 12
Rocstor Y10A237-B1 User Manual preview
Y10A237-B1
Brand: Rocstor Pages: 2
Targus ACA958USZ User Manual preview
ACA958USZ
Brand: Targus Pages: 8
NETGEAR WNDA3200 User Manual preview
WNDA3200
Brand: NETGEAR Pages: 18
3idee hp2x-o Assembly Instructions Manual preview
hp2x-o
Brand: 3idee Pages: 7
ACTiSYS ACT-IR200L User Manual preview
ACT-IR200L
Brand: ACTiSYS Pages: 8
StarTech.com PCI220USB Instruction Manual preview
PCI220USB
Brand: StarTech.com Pages: 10
Targus APA109 User Manual preview
APA109
Brand: Targus Pages: 113
Devolo dLAN 200 AVpro Manual preview
dLAN 200 AVpro
Brand: Devolo Pages: 22
Abus ITAC10300 User Manual preview
ITAC10300
Brand: Abus Pages: 23
ISY IAC 4500 User Manual preview
IAC 4500
Brand: ISY Pages: 20
Air Live AirLive HP-3000E Quick Setup Manual preview
AirLive HP-3000E
Brand: Air Live Pages: 39
Salto KPB03 Series Quick Start Manual preview
KPB03 Series
Brand: Salto Pages: 2
3idee vs-vx24 Assembly Instructions preview
vs-vx24
Brand: 3idee Pages: 4
Asante FriendlyNET FBT100 User Manual preview
FriendlyNET FBT100
Brand: Asante Pages: 44

Brands by name

Popular brands

Load more brands