Security
SSL Server
346
Cisco 350, 350X and 550X Series Managed Switches, Firmware Release 2.4, ver 0.4
17
•
Valid To—
Specifies the date up to which the certificate is valid.
•
Certificate Source—
Specifies whether the certificate was generated by the system
(Auto Generated) or the user (User Defined).
STEP 2
Select an active certificate.
STEP 3
Click
Generate Certificate Request
.
STEP 4
Enter the following fields:
•
Certificate ID
—Select the active certificate.
•
Common Name
—Specifies the fully-qualified device URL or IP address. If
unspecified, defaults to the lowest IP address of the device (when the certificate is
generated).
•
Organization Unit
—Specifies the organization-unit or department name.
•
Organization Name
—Specifies the organization name.
•
Location
—Specifies the location or city name.
•
State
—Specifies the state or province name.
•
Country
—Specifies the country name.
•
Certificate Request
—Displays the key created when the
Generate Certificate
Request
button is pressed.
STEP 5
Click
Generate Certificate Request
. This creates a key that must be entered on the
Certification Authority (CA). Copy it from the
Certificate Request
field.
To import a certificate:
STEP 1
Click
Security > SSL Server > SSL Server Authentication Settings.
STEP 2
Click
Import Certificate
.
STEP 3
Enter the following fields:
•
Certificate ID
—Select the active certificate.
•
Certificate Source
—Displays that the certificate is user-defined.
•
Certificate
—Copy in the received certificate.
•
Import RSA Key-Pair
—Select to enable copying in the new RSA key-pair.
