Security
Management Access Method
342
Cisco 350, 350X and 550X Series Managed Switches, Firmware Release 2.4, ver 0.4
17
The selected access profile appears in the Profile Rule Table.
STEP 3
Click
Add
to add a rule.
STEP 4
Enter the parameters.
•
Access Profile Name
—Select an access profile.
•
Rule Priority
—Enter the rule priority. When the packet is matched to a rule, user
groups are either granted or denied access to the device. The rule priority is essential to
matching packets to rules, as packets are matched on a first-fit basis.
•
Management Method
—Select the management method for which the rule is defined.
The options are:
-
All
—Assigns all management methods to the rule.
-
Telnet
—Users requesting access to the device that meets the Telnet access profile
criteria are permitted or denied access.
-
Secure Telnet (SSH)
—Users requesting access to the device that meets the Telnet
access profile criteria, are permitted or denied access.
-
HTTP
—Assigns HTTP access to the rule. Users requesting access to the device that
meets the HTTP access profile criteria, are permitted or denied.
-
Secure HTTP (HTTPS)
—Users requesting access to the device that meets the
HTTPS access profile criteria, are permitted or denied.
-
SNMP
—Users requesting access to the device that meets the SNMP access profile
criteria are permitted or denied.
•
Action
—Select one of the following options.
-
Permit
—Allow device access to users coming from the interface and IP source
defined in this rule.
-
Deny
—Deny device access to users coming from the interface and IP source defined
in this rule.
•
Applies to Interface
—Select the interface attached to the rule. The options are:
-
All
—Applies to all ports, VLANs, and LAGs.
-
User Defined
—Applies only to the port, VLAN, or LAG selected.
•
Interface
—Enter the interface number. The OOB port can also be entered.
