manualshive.com logo in svg

Cisco 4700 series, Administration Manual

The Cisco 4700 series Configuration Manual is a comprehensive and user-friendly guide that provides step-by-step instructions for setting up and optimizing your Cisco 4700 series product. This essential manual is available for free download exclusively at manualshive.com, offering users easy access to valuable information to enhance their product experience.

Share
Download
background image

   

1-27

Cisco 4700 Series Application Control Engine Appliance Administration Guide

OL-11157-01 

Chapter 1      Setting Up the ACE

Synchronizing the ACE with an NTP Server

For example, to display the statistic counters related to the memory code, enter:

switch/Admin# 

show ntp statistics memory

Table 1-6 

describes the fields in the 

show ntp statistics memory 

command 

output.

Table 1-6

Field Descriptions for show ntp statistics memory Command 

Field

Description

Time since reset

Time in hours since the ACE was last rebooted.

Total peer memory

Total peer memory available for the allocation of 
memory to peer structures.

Free peer memory

Current available peer memory.

Calls to findpeer

The number of calls to findpeer. 

Note

findpeer is an entry point to the allocation of 
memory to peer structures that looks for 
matching peer structures in the peer list.

New peer allocations

Number of allocations from the free list.

Peer demobilizations 

Number of structures freed to the free list.

Hash table counts

The count of peers in each hash table.

For example, to display the per-peer statistics counter of a peer, enter:

switch/Admin# 

show ntp statistics peer 192.168.1.2

Table 1-7 

describes the fields in the 

show ntp statistics peer 

command output.

Table 1-7

Field Descriptions for show ntp statistics peer Command 

Field

Description

Remote Host

IP address of the specified peer.

Local Interface

IP address of specified local interface.

Time Last Received

Time that the last NTP response was received.

Time Until Next Send

Length of time until the next send attempt.

Reachability Change

The reachability status for the peer.

Summary of Contents for 4700 series



































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 4700 series

D-Link DI-106 Series Faq preview
DI-106 Series
Brand: D-Link Pages: 29
D-Link DGS-3700 Series User Manual preview
DGS-3700 Series
Brand: D-Link Pages: 292
D-Link DGS-3224SR User Manual preview
DGS-3224SR
Brand: D-Link Pages: 140
D-Link DGS-1224T - Web Smart Switch User Manual preview
DGS-1224T - Web Smart Switch
Brand: D-Link Pages: 61
D-Link DI-LB604 - Load Balancing Router Quick Installation Manual preview
DI-LB604 - Load Balancing Router
Brand: D-Link Pages: 14
D-Link DIR-605L Specification preview
DIR-605L
Brand: D-Link Pages: 2
D-Link DIR-510L Manual preview
DIR-510L
Brand: D-Link Pages: 45
D-Link DES-3550 Manual preview
DES-3550
Brand: D-Link Pages: 218
D-Link DES-3528 - xStack Switch - Stackable User Manual preview
DES-3528 - xStack Switch - Stackable
Brand: D-Link Pages: 322
D-Link DIR-130 - Broadband VPN Router How To Set Up preview
DIR-130 - Broadband VPN Router
Brand: D-Link Pages: 10
D-Link DIR-130 - Broadband VPN Router Troubleshooting Manual preview
DIR-130 - Broadband VPN Router
Brand: D-Link Pages: 4
D-Link DIR-130 - Broadband VPN Router Configuration preview
DIR-130 - Broadband VPN Router
Brand: D-Link Pages: 13
D-Link DIR Series Configuration Manual preview
DIR Series
Brand: D-Link Pages: 13
D-Link DI-804HV - Express ENwork Router Configuration Manual preview
DI-804HV - Express ENwork Router
Brand: D-Link Pages: 19
D-Link DI-808HV Quick Installation Manual preview
DI-808HV
Brand: D-Link Pages: 12
D-Link DI-804 Quick Install Manual preview
DI-804
Brand: D-Link Pages: 8
D-Link DI-604UP Quick Install Manual preview
DI-604UP
Brand: D-Link Pages: 16
D-Link DI-304 Technical Bulletin preview
DI-304
Brand: D-Link Pages: 7

Brands by name

Popular brands

Load more brands