Cisco 4700 series Administration Manual Download Page 352 | Manualshive

Page: 352 / 418

background image

Chapter 8 Configuring SNMP

Configuring SNMP Management Traffic Services

8-42

Cisco 4700 Series Application Control Engine Appliance Administration Guide

OL-11157-01

•

mask—

Subnet mask of the client in dotted-decimal notation (for example,

255.255.255.0).

For example, to specify that the class map allows SNMP access to the ACE from
source address 192.168.10.1 255.255.255.0, enter:

host1/Admin(config)#

class-map type management SNMP-ALLOW_CLASS

host1/Admin(config-cmap-mgmt)#

match protocol snmp source-address

192.168.10.1 255.255.255.0

To deselect the specified SNMP protocol match criteria from the class map, enter:

host1/Admin(config-cmap-mgmt)#

no match protocol snmp

Creating a Layer 3 and Layer 4 Policy Map

A Layer 3 and Layer 4 policy map defines the actions executed on SNMP network
management traffic that matches the specified classifications. This section
contains the following topics:

•

Creating a Layer 3 and Layer 4 Policy Map for SNMP Network Management
Traffic Received by the ACE

•

Specifying a Layer 3 and Layer 4 Traffic Class with the Traffic Policy

•

Specifying Layer 3 and Layer 4 Policy Actions

Creating a Layer 3 and Layer 4 Policy Map for SNMP Network Management Traffic
Received by the ACE

To configure a Layer 3 and Layer 4 policy map that permits the ACE to receive
the SNMP management protocol, use the

policy-map type management

command in configuration mode. The ACE executes the action for the first
matching classification. The ACE does not execute any additional actions.

The syntax of this command is as follows:

policy-map type management first-match

map_name

The

map_name

argument specifies the name assigned to the Layer 3 and Layer 4

network management policy map. Enter an unquoted text string with no spaces
and a maximum of 64 alphanumeric characters.

«
...
350
351
352
353
354
...
»

Summary of Contents for 4700 series



































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 4700 series

Brand: D-Link Pages: 5

Brand: D-Link Pages: 2

Brand: Panasonic Pages: 4

Brand: PaloAlto Networks Pages: 2

Brand: Garland Pages: 6

Brand: FOR-A Pages: 2

Brand: Axis Pages: 104

Brand: Lancom Pages: 70

Brand: Patton electronics Pages: 12

Brand: E-Lins Pages: 9

Brand: ZyXEL Communications Pages: 2

NVIP- NVRA0104/GO

Brand: Novus Pages: 44

Brand: Buffalo Pages: 2

301297U - 1TB Ethernet Disk XP Embedded Network Attached...

Brand: LaCie Pages: 67

Brand: F.F. Group Pages: 56

Brand: VideoWave Pages: 12

Brand: 2N Telekomunikace Pages: 67

EdgePoint EP-R8

Brand: Ubiquiti Pages: 22

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands