manualshive.com logo in svg

Cisco 4700 series, Administration Manual

The Cisco 4700 series Configuration Manual is a comprehensive and user-friendly guide that provides step-by-step instructions for setting up and optimizing your Cisco 4700 series product. This essential manual is available for free download exclusively at manualshive.com, offering users easy access to valuable information to enhance their product experience.

Share
Download
background image

   

2-13

Cisco 4700 Series Application Control Engine Appliance Administration Guide

OL-11157-01 

Chapter 2      Enabling Remote Access to the ACE

Configuring Remote Network Management Traffic Services

Applying a Service Policy

Use the 

service-policy 

command to perform the following tasks:

  •

Apply a previously created policy map.

  •

Attach the traffic policy to a specific VLAN interface or globally to all VLAN 
interfaces in the same context.

  •

Specify that the traffic policy is to be attached to the input direction of an 
interface.

The 

service-policy

 command is available at both the interface configuration mode 

and at the configuration mode. Specifying a policy map in the interface 
configuration mode applies the policy map to a specific VLAN interface. 
Specifying a policy map in the configuration mode applies the policy to all of the 
VLAN interfaces associated with a context.

The syntax of this command is:

service-policy

 

input 

policy_name

The keywords, arguments, and options are:

  •

input

—Specifies that the traffic policy is to be attached to the input direction 

of an interface. The traffic policy evaluates all traffic received by that 
interface.

  •

policy_name

—Specifies the name of a previously defined policy map, 

configured with a previously created 

policy-map 

command. The name can be 

a maximum of 40 alphanumeric characters.

For example, to specify an interface VLAN and apply the remote access policy 
map to a VLAN, enter:

host1/Admin(config)# 

interface vlan 50

host1/Admin(config-if)# 

ip address 172.16.1.100 255.255.0.0

host1/Admin(config-if)# 

service-policy input REMOTE_MGMT_ALLOW_POLICY

For example, to globally apply the remote access policy map to all of the VLANs 
associated with a context, enter:

host1/Admin(config)# 

service-policy input REMOTE_MGMT_ALLOW_POLICY

To detach the remote access traffic policy from an interface, enter:

host1/Admin(config-if)# 

no service-policy input 

REMOTE_MGMT_ALLOW_POLICY

Summary of Contents for 4700 series



































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 4700 series

2N OfficeRoute Quick Manual preview
OfficeRoute
Brand: 2N Pages: 11
2N stargate How To Set preview
stargate
Brand: 2N Pages: 5
2N Telekomunikace EasyGate IP Brief Manual preview
EasyGate IP
Brand: 2N Telekomunikace Pages: 24
Garland P1GCCAS Installation Manual preview
P1GCCAS
Brand: Garland Pages: 4
E-TOP BR486n User Manual preview
BR486n
Brand: E-TOP Pages: 76
H3C S12500R-2L Installation Manual preview
S12500R-2L
Brand: H3C Pages: 77
Genie WONVR216P5 Quick Start Manual preview
WONVR216P5
Brand: Genie Pages: 15
Ubiquiti PowerBeam AC Gen2 Quick Start Manual preview
PowerBeam AC Gen2
Brand: Ubiquiti Pages: 22
Xircom RealPort Ethernet 10/100 User Manual preview
RealPort Ethernet 10/100
Brand: Xircom Pages: 30
Tektronix CTS 850 User Manual preview
CTS 850
Brand: Tektronix Pages: 178
IMC Networks iMcV-FiberLinX Operation Manual preview
iMcV-FiberLinX
Brand: IMC Networks Pages: 36
Active Communications ACS express Quick Start Manual preview
ACS express
Brand: Active Communications Pages: 10
Dahua Technology NVR2104/2108HS-W-4KS2 1U User Manual preview
NVR2104/2108HS-W-4KS2 1U
Brand: Dahua Technology Pages: 363
ExtraHop 72 TB ESU Quick Start Manual preview
72 TB ESU
Brand: ExtraHop Pages: 3
DELTA GROUP LOYTEC LIP‑3ECTC Installation Instructions preview
LOYTEC LIP‑3ECTC
Brand: DELTA GROUP Pages: 4
YDI WL2400-ISA Installation & Operation Manual preview
WL2400-ISA
Brand: YDI Pages: 16
ICP DAS USA PDS-734 Quick Start Manual preview
PDS-734
Brand: ICP DAS USA Pages: 8
Netstor NA762TB3 User Manual preview
NA762TB3
Brand: Netstor Pages: 17

Brands by name

Popular brands

Load more brands