manualshive.com logo in svg

Cisco 4700 series, Administration Manual

The Cisco 4700 series Configuration Manual is a comprehensive and user-friendly guide that provides step-by-step instructions for setting up and optimizing your Cisco 4700 series product. This essential manual is available for free download exclusively at manualshive.com, offering users easy access to valuable information to enhance their product experience.

Share
Download
background image

   

Chapter 8      Configuring SNMP

SNMP Overview

8-10

Cisco 4700 Series Application Control Engine Appliance Administration Guide

OL-11157-01 

SNMP-FRAMEWORK-

 

MIB

CISCO-SNMP-

 

FRAMEWORK-

 

CAPABILITY

Defines the elements of SNMP Management 
Frameworks, including an SNMP engine and 
Access Control Subsystem.

The SNMP-FRAMEWORK-MIB is described 
in RFC 3411.

SNMP-MPD-MIB

CISCO-SNMP-MPD-

 

CAPABILITY.my

Describes the Message Processing Subsystem 
and Dispatcher for SNMP. The Dispatcher in 
the SNMP engine sends and receives SNMP 
messages. It also dispatches SNMP PDUs to 
SNMP applications. A Message Processing 
Model processes an SNMP version-specific 
message and coordinates the interaction with 
the Security Subsystem to ensure that proper 
security is applied to the SNMP message 
being handled. 

The SNMP-MPD-MIB is described in RFC 
3412.

SNMP-NOTIFICATION-

 

MIB

CISCO-SNMP-

 

NOTIFICATION-

 

CAPABILITY

Defines MIB objects that can remotely 
configure the parameters used by an SNMP 
entity for the generation of notifications.

The SNMP-NOTIFICATION-MIB is 
described in RFC 3413.

SNMP-TARGET-MIB

CISCO-SNMP-

 

TARGET-

 

CAPABILITY

Contains a table for the destination 
information and SNMP parameters in the 
management target message. There can be a 
many-to-many relationship in the MIB 
between these two types of information. 
Multiple transport end points may be 
associated with a particular set of SNMP 
parameters, or a particular transport end point 
may be associated with several sets of SNMP 
parameters.

The SNMP-TARGET-MIB is described in 
RFC 3413.

Table 8-1

SNMP MIB Support (continued)

MIB Support

Capability MIB

Description

Summary of Contents for 4700 series



































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 4700 series

?omtime CT-Router LAN User Manual preview
CT-Router LAN
Brand: ?omtime Pages: 62
Lanner NCA-4035 User Manual preview
NCA-4035
Brand: Lanner Pages: 109
National Instruments FieldPoint cFP-RTD-122 Operating Instructions Manual preview
FieldPoint cFP-RTD-122
Brand: National Instruments Pages: 15
YATO YT-82380 Original Instructions Manual preview
YT-82380
Brand: YATO Pages: 96
ActionTec GT704WR User Manual preview
GT704WR
Brand: ActionTec Pages: 115
Tripp Lite N201-007-YW Specification Sheet preview
N201-007-YW
Brand: Tripp Lite Pages: 2
Paradyne 8310 MVLt User Manual preview
8310 MVLt
Brand: Paradyne Pages: 108
Vaisala TERMBOX-9000 User Manual preview
TERMBOX-9000
Brand: Vaisala Pages: 32
Chaparral FS1310 User Manual preview
FS1310
Brand: Chaparral Pages: 96
Ubiquiti Amplifi AFi-LR Quick Start Manual preview
Amplifi AFi-LR
Brand: Ubiquiti Pages: 32
Western Digital Passport WDXML1000UE Product Specifications preview
Passport WDXML1000UE
Brand: Western Digital Pages: 2
qpcom QP-S108 User Manual preview
QP-S108
Brand: qpcom Pages: 4
Foscam FN3104W User Manual preview
FN3104W
Brand: Foscam Pages: 92
KTI Networks KGS-2421 Installation Manual preview
KGS-2421
Brand: KTI Networks Pages: 25
Magma ExpressBox4 1U Quick Installation Manual preview
ExpressBox4 1U
Brand: Magma Pages: 2
Crestron CNXIRP Installation Instructions preview
CNXIRP
Brand: Crestron Pages: 2
MikroTik LHG 60G Quick Manual preview
LHG 60G
Brand: MikroTik Pages: 25
D-Link N300 User Manual preview
N300
Brand: D-Link Pages: 236

Brands by name

Popular brands

Load more brands