manualshive.com logo in svg

Cisco 4700 series, Administration Manual

The Cisco 4700 series Configuration Manual is a comprehensive and user-friendly guide that provides step-by-step instructions for setting up and optimizing your Cisco 4700 series product. This essential manual is available for free download exclusively at manualshive.com, offering users easy access to valuable information to enhance their product experience.

Share
Download
background image

   

7-55

Cisco 4700 Series Application Control Engine Appliance Administration Guide

OL-11157-01 

Chapter 7      Configuring Redundant ACE Appliances

Displaying Redundancy Information

Maintenance 
Mode

Current maintenance mode of the local context in an FT 
group. Applications can turn on maintenance mode when 
there is an inability to communicate with the peer, license 
mismatches, too many application errors, and so on. 
Possible states are: 

  •

MAINT_MODE_OFF—Maintenance mode is turned 
off.

  •

MAINT_MODE_PARTIAL— All standby contexts 
transition to the FSM_FT_STATE_STANDBY_COLD 
state (see the 

“My State”

 field description). The ACE 

enters this mode if configuration synchronization fails.

  •

MAINT_MODE_FULL—All contexts on the ACE 
become nonredundant causing their peer contexts to 
become active. The ACE enters this mode just before 
you reboot the appliance and is used primarily when 
you upgrade the ACE software.

Table 7-6

Field Descriptions for the show ft track Command Output

 

(continued)

 

Field

Description

Summary of Contents for 4700 series



































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 4700 series

Cambium Networks PTP 550 Series Quick Start Manual preview
PTP 550 Series
Brand: Cambium Networks Pages: 68
Cambium Networks PTP 820S Installation Manual preview
PTP 820S
Brand: Cambium Networks Pages: 110
Genie WONVR216P5 Quick Start Manual preview
WONVR216P5
Brand: Genie Pages: 15
Multitech MultiConnect SE MTS2EA Specification Sheet preview
MultiConnect SE MTS2EA
Brand: Multitech Pages: 2
Compaq StorageWorks AIT 35GB AutoLoader Overview And Installation preview
StorageWorks AIT 35GB AutoLoader
Brand: Compaq Pages: 4
Speedtouch IPQoS Configuration Manual preview
IPQoS
Brand: Speedtouch Pages: 124
Paradyne 7510 DSU Start-Up Instructions preview
7510 DSU
Brand: Paradyne Pages: 10
Freund FE-W826-T2 Setup Manual preview
FE-W826-T2
Brand: Freund Pages: 6
Dantel 44118 Installation & Operation Manual preview
44118
Brand: Dantel Pages: 22
EMC VNX5300 Block Hardware Information Manual preview
VNX5300 Block
Brand: EMC Pages: 88
ZyXEL Communications Prestige 643 User Manual preview
Prestige 643
Brand: ZyXEL Communications Pages: 191
Billion BiPAC 7560G Specifications preview
BiPAC 7560G
Brand: Billion Pages: 2
ADC The DSX Value Solution (Japanese) LDX154 (Japanese) Brochure preview
The DSX Value Solution (Japanese) LDX154
Brand: ADC Pages: 4
Tripp Lite N316-10M Specification Sheet preview
N316-10M
Brand: Tripp Lite Pages: 2
TECOM IG7500 Administration Manual preview
IG7500
Brand: TECOM Pages: 37
Eaton 9479-ET-CSL Instruction Manual preview
9479-ET-CSL
Brand: Eaton Pages: 32
Eci Telecom XDM-100 General Description Manual preview
XDM-100
Brand: Eci Telecom Pages: 98
Optocore YG2 Operating Manual preview
YG2
Brand: Optocore Pages: 21

Brands by name

Popular brands

Load more brands