Cisco 4700 series Administration Manual Download Page 187

Page: 187 / 418

4-73

Cisco 4700 Series Application Control Engine Appliance Administration Guide

OL-11157-01

Chapter 4 Configuring Class Maps and Policy Maps

Viewing Class Maps, Policy Maps, and Service Policies

Table 4-11

describes the various fields that can appear in the

show service-policy

detail

command output.

Table 4-11

Field Descriptions for the show service-policy detail Command

Output

Field

Description

Status

Status of the policy map as applied in a service policy to a
VLAN interface: Active or Inactive.

Description

Optional description about the policy map.

Context Global
Policy

Status whether the service policy has been applied globally
in configuration mode to all VLAN interfaces for the
context.

Interface

VLAN identifier of the interface associated with the service
policy.

Service-Policy

Identifier of the policy map.

Class

Identifier of the class map associated with the policy map.

Inspect DNS

DNS application protocol inspection statistics.

Inspect HTTP

HTTP application protocol inspection statistics.

Inspect FTP

FTP application protocol inspection statistics.

Inspect ICMP

ICMP application protocol inspection statistics.

Inspect RTSP

RTSP application protocol inspection statistics.

Loadbalance

Server load-balancing statistics.

Nat

NAT statistics.

Max Length

Maximum length of a DNS reply.

Strict FTP

Status of the strict FTP function for FTP application
protocol inspection: Enabled or Disabled.

URL Logging

Status of the URL logging function for HTTP application
protocol inspection: Enabled or Disabled.

ICMP Error

Status of the ICMP error function for ICMP application
protocol inspection: Enabled or Disabled.

Nat Dynamic

NAT pool identifier with the configured interface VLAN.

VIP Route Metric Not applicable for the ACE appliance.

Summary of Contents for 4700 series



































































































































































































































































































































































































































Search results

Summary of Contents for 4700 series

Reviews:

Related manuals for 4700 series

Brands by name

Popular brands

Cisco 4700 series, Administration Manual

Search results

Summary of Contents for 4700 series

Reviews:

Related manuals for 4700 series

Brands by name

Popular brands