Cisco 4700 series Administration Manual Download Page 250

Page: 250 / 418

Chapter 6 Viewing ACE Hardware and Software Configuration Information

Displaying Technical Support Information

6-18

Cisco 4700 Series Application Control Engine Appliance Administration Guide

OL-11157-01

Note

You can save the output of this command to a file by appending >

filename

to the

show tech-support

command (see

Chapter 5,

Managing the ACE Software

). If

you save this file, verify that you have sufficient space to do so; each file may take
about 1.8 MB.

The default output of the

show tech-support

command includes the output of the

following commands:

•

show environment—

See the

“Displaying ACE Environment Information”

section

•

show hardware—

See the

“Displaying Hardware Information”

section

•

show interface—

See the

Cisco 4700 Series Application Control Engine

Appliance Routing and Bridging Configuration Guide

•

show process—

See the

“Displaying System Processes”

section

•

show running-config—

See the

Chapter 5,

Managing the ACE Software

•

show version—

See the

“Displaying Software Version Information”

section

The syntax of this command is:

show tech-support

[

details

]

The optional

details

keyword provides detailed information for each

show

command.

For example, to display an excerpt of the current running state of the ACE, enter:

host1/Admin#

show tech-support

`show version`

Cisco Application Control Software (ACSW)

TAC support: http://www.cisco.com/tac

The copyrights to certain works contained herein are owned by

other third parties and are used and distributed under license.

Some parts of this software are covered under the GNU Public

License. A copy of the license is available at

http://www.gnu.org/licenses/gpl.html.

Summary of Contents for 4700 series



































































































































































































































































































































































































































Search results

Summary of Contents for 4700 series

Reviews:

Related manuals for 4700 series

Brands by name

Popular brands

Cisco 4700 series, Administration Manual

Search results

Summary of Contents for 4700 series

Reviews:

Related manuals for 4700 series

Brands by name

Popular brands