manualshive.com logo in svg

Cisco 4700 series, Administration Manual

The Cisco 4700 series Configuration Manual is a comprehensive and user-friendly guide that provides step-by-step instructions for setting up and optimizing your Cisco 4700 series product. This essential manual is available for free download exclusively at manualshive.com, offering users easy access to valuable information to enhance their product experience.

Share
Download
background image

   

8-17

Cisco 4700 Series Application Control Engine Appliance Administration Guide

OL-11157-01 

Chapter 8      Configuring SNMP

SNMP Overview

CISCO-PROCESS-MIB

CISCO-PROCESS-

 

CAPABILITY

Displays memory and process CPU utilization 
on Cisco devices. This information should be 
used only as an estimate. The value of 
cpmCPUTotalPhysicalIndex will always be 1.

The displayed system processes information at 
the CPU system level (the total CPU usage) and 
not on a per-context level.

CISCO-PRODUCTS-MIB

N/A

Contains the OIDs that can be reported in the 
sysObjectID object in the SNMPv2-MIB. The 
sysObjectID OID value is listed as follows:

Product Name (PID)/sysObjectID 

ACE4710-K9

 

ciscoACE4710K9 {ciscoProducts 824}

CISCO-SLB-EXT-MIB

CISCO-SLB-EXT-

 

CAPABILITY

Acts as an extension to the Cisco server 
load-balancing MIB (CISCO-SLB-MIB). It 
provides tables for the sticky configuration.

The following MIB objects for the ACE 
include non-SLB related connections as well:

  •

cslbxStatsCurrConnections

  •

cslbxStatsTimedOutConnections

CISCO-SLB-HEALTH-

 

MON-MIB

CISCO-SLB-HEALTH-

 

MON-CAPABILITY

Acts as an extension to the Cisco server 
load-balancing MIB (CISCO-SLB-MIB). It 
provides tables for the probe configuration.

Table 8-1

SNMP MIB Support (continued)

MIB Support

Capability MIB

Description

Summary of Contents for 4700 series



































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 4700 series

3Com 486 Getting Started Manual preview
486
Brand: 3Com Pages: 20
Panasonic KX-HTS Series Quick Start Manual preview
KX-HTS Series
Brand: Panasonic Pages: 2
Pakedge Device & Software X-Series Quick Start Manual preview
X-Series
Brand: Pakedge Device & Software Pages: 20
H3C S12500R-2L Installation Manual preview
S12500R-2L
Brand: H3C Pages: 77
Server Technology Sentry Global Security Modem Installation And Operation Manual preview
Sentry Global Security Modem
Brand: Server Technology Pages: 22
IBM BladeCenter Management Module Installation And User Manual preview
BladeCenter Management Module
Brand: IBM Pages: 184
Juniper MX2010 Hardware Manual preview
MX2010
Brand: Juniper Pages: 825
C&H Active Module Carrier VX402C-64 User Manual preview
Active Module Carrier VX402C-64
Brand: C&H Pages: 32
Lucent Technologies Cajun P118LX Installation Manual preview
Cajun P118LX
Brand: Lucent Technologies Pages: 20
FOR-A MFR-1616 Quick Start Manual preview
MFR-1616
Brand: FOR-A Pages: 2
Amit CDD531AM-U02 User Manual preview
CDD531AM-U02
Brand: Amit Pages: 75
LevelOne GSW-0890 Quick Installation Manual preview
GSW-0890
Brand: LevelOne Pages: 4
Edgewater Networks EdgeMarc 4300T Installation Manual preview
EdgeMarc 4300T
Brand: Edgewater Networks Pages: 23
Stephen SON8010U User Manual preview
SON8010U
Brand: Stephen Pages: 8
ZyXEL Communications ES-105 User Manual preview
ES-105
Brand: ZyXEL Communications Pages: 12
MikroTik wAP series User Manual preview
wAP series
Brand: MikroTik Pages: 5
ADTRAN NetVanta 1224 Quick Start Manual preview
NetVanta 1224
Brand: ADTRAN Pages: 2
ADTRAN NetVanta 1335 Series Quick Start Manual preview
NetVanta 1335 Series
Brand: ADTRAN Pages: 4

Brands by name

Popular brands

Load more brands