Cisco 4700 series Administration Manual Download Page 305

Page: 305 / 418

7-53

Cisco 4700 Series Application Control Engine Appliance Administration Guide

OL-11157-01

Chapter 7 Configuring Redundant ACE Appliances

Displaying Redundancy Information

LB Stats for FT Group

Send-side Stats

Number of
Sticky
Entries
Shared

Number of sticky database entries that the local ACE sent to
the remote ACE.

Number of
Replication
Packets Sent

Number of packets that contain replication information that
the local ACE sent to the remote ACE.

Number of
Send
Failures

Number of times that the local ACE attempted to send
packets to the remote ACE but failed.

Receive-side Stats

Number of
Sticky
Entries
Dropped

Number of sticky database entries that the remote ACE sent
to the local ACE, but the local ACE discarded them.

Number of
Replication
Packets
Received

Number of packets that contain replication information that
the local ACE received from the remote ACE.

Number of
Receive
Failures

Number of times that the remote ACE sent packets to the
local ACE, but the local ACE failed to receive them.

Table 7-5

Field Descriptions for the show ft stats Command Output

(continued)

Field

Description

Summary of Contents for 4700 series



































































































































































































































































































































































































































Search results

Summary of Contents for 4700 series

Reviews:

Related manuals for 4700 series

Brands by name

Popular brands

Cisco 4700 series, Administration Manual

Search results

Summary of Contents for 4700 series

Reviews:

Related manuals for 4700 series

Brands by name

Popular brands