manualshive.com logo in svg

Cisco 4700 series, Administration Manual

The Cisco 4700 series Configuration Manual is a comprehensive and user-friendly guide that provides step-by-step instructions for setting up and optimizing your Cisco 4700 series product. This essential manual is available for free download exclusively at manualshive.com, offering users easy access to valuable information to enhance their product experience.

Share
Download
background image

   

Chapter 8      Configuring SNMP

Configuring SNMP Notifications

8-34

Cisco 4700 Series Application Control Engine Appliance Administration Guide

OL-11157-01 

Enabling SNMP Notifications

Notification traps and inform requests are system alerts that the ACE generates 
when certain events occur. SNMP notifications can be sent to the NMS as traps or 
inform requests. By default, no notification is defined or issued. To enable the 
ACE to send SNMP traps and informs to the NMS, use the 

snmp-server enable 

traps 

command in configuration mode. This command enables both traps and 

inform requests for the specified notification types. 

To configure the ACE to send the SNMP notifications, specify at least one 

snmp-server enable traps 

command. To enable multiple types of notifications, 

you must enter a separate 

snmp-server enable traps

 command for each 

notification type and notification option. If you enter the command without any 
keywords, the ACE enables all notification types and traps. 

The 

snmp-server enable traps

 command is used with the 

snmp-server host

 

command (see the 

“Configuring SNMP Notification Hosts”

 section). The 

snmp-server host

 command specifies which host receives the SNMP 

notifications. To send notifications, you must configure at least one SNMP server 
host. 

Note

The notification types used in the 

snmp-server enable traps 

command all have 

an associated MIB object that globally enables or disables them. However, not all 
of the notification types available in the 

snmp-server host

 command have 

notificationEnable MIB objects, so some of the notification types cannot be 
controlled by using the 

snmp-server enable

 command. 

The syntax of this command is as follows:

snmp-server enable traps

 [

notification_type

] [

notification_option

]

The keywords, arguments, and options are as follows:

  •

notification_type

—(Optional) Type of notification to enable. If no type is 

specified, the ACE sends all notifications. Specify one of the following 
keywords as the 

notification_type

:

  –

license

—Sends SNMP license manager notifications. This keyword 

appears only in the Admin context.

  –

slb

—Sends server load-balancing notifications. When you specify the 

slb 

keyword, you can specify a 

notification_option

 value.

Summary of Contents for 4700 series



































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 4700 series

D-Link DSL-2750U Setup preview
DSL-2750U
Brand: D-Link Pages: 14
D-Link DVG-7022S Quick Installation Manual preview
DVG-7022S
Brand: D-Link Pages: 7
D-Link DIR-878 Quick Installation Manual preview
DIR-878
Brand: D-Link Pages: 41
D-Link PowerLine DHP-W611AV User Manual preview
PowerLine DHP-W611AV
Brand: D-Link Pages: 78
3Com OfficeConnect 1600 Datasheet preview
OfficeConnect 1600
Brand: 3Com Pages: 8
3Com 3CRWEASY96A Quick Start Manual preview
3CRWEASY96A
Brand: 3Com Pages: 8
DataRemote CDS-9010 Quick Start Manual preview
CDS-9010
Brand: DataRemote Pages: 2
?omtime CT-Router LAN User Manual preview
CT-Router LAN
Brand: ?omtime Pages: 62
E-Lins H900 Series Quick Start Manual preview
H900 Series
Brand: E-Lins Pages: 9
ZyXEL Communications NBG318S v2 Specifications preview
NBG318S v2
Brand: ZyXEL Communications Pages: 2
Garland INT40G2SR44 User Manual preview
INT40G2SR44
Brand: Garland Pages: 43
National Instruments NI-9206 Getting Started preview
NI-9206
Brand: National Instruments Pages: 8
Balluff Easy Tool-ID BSG TID-05-T30-00-005 Installation And Operation Manual preview
Easy Tool-ID BSG TID-05-T30-00-005
Brand: Balluff Pages: 46
MEMON memonizerWORKSTATION Quick Start Manual preview
memonizerWORKSTATION
Brand: MEMON Pages: 2
Korenix JetNet 3508-LVDC User Manual preview
JetNet 3508-LVDC
Brand: Korenix Pages: 16
H3C MSR 930 Installation, Quick Start preview
MSR 930
Brand: H3C Pages: 4
iDirect iNFINITI 3000 Installation And Commissioning Manual preview
iNFINITI 3000
Brand: iDirect Pages: 72
Paradyne 8310 MVLt User Manual preview
8310 MVLt
Brand: Paradyne Pages: 108

Brands by name

Popular brands

Load more brands