Cisco 4700 series Administration Manual Download Page 32

Page: 32 / 418

Chapter 1 Setting Up the ACE

Using the Setup Script to Enable Connectivity to the Device Manager

1-6

Cisco 4700 Series Application Control Engine Appliance Administration Guide

OL-11157-01

policy-map type management first-match first-match

remote_mgmt_allow_policy

class remote_access

permit

interface vlan 2

ip address 192.168.1.10 255.255.255.0

access-group input ALL

service-policy input remote_mgmt_allow_policy

no shutdown

ip route 0.0.0.0 0.0.0.0 172.16.2.1

Step 12

At the prompt “Would you like to edit the configuration? (yes/no) [n]:”, enter one
of the following replies:

•

Type

to modify the configuration at the CLI.

•

Type

to accept the configuration without any additional changes. This

setting is the default.

Step 13

At the prompt “Use this configuration? (yes/no) [y]”:, enter one of the following
replies:

•

Type

to instruct the ACE to boot using the newly created

running-configuration file. This is the default.

•

Type

to bypass using the newly created running-configuration file and boot

with an empty configuration.

Step 14

At the prompt “Would you like to save the running-config to startup-config?
(yes/no) [n]:, enter one of the following replies:

•

Type

to save the running-configuration to the startup-configuration file.

•

Type

to bypass saving the running-configuration to the

startup-configuration file.

Summary of Contents for 4700 series



































































































































































































































































































































































































































Search results

Summary of Contents for 4700 series

Reviews:

Related manuals for 4700 series

Brands by name

Popular brands

Cisco 4700 series, Administration Manual

Search results

Summary of Contents for 4700 series

Reviews:

Related manuals for 4700 series

Brands by name

Popular brands