manualshive.com logo in svg

Cisco 4700 series, Administration Manual

The Cisco 4700 series Configuration Manual is a comprehensive and user-friendly guide that provides step-by-step instructions for setting up and optimizing your Cisco 4700 series product. This essential manual is available for free download exclusively at manualshive.com, offering users easy access to valuable information to enhance their product experience.

Share
Download
background image

   

8-19

Cisco 4700 Series Application Control Engine Appliance Administration Guide

OL-11157-01 

Chapter 8      Configuring SNMP

SNMP Overview

CISCO-SYSLOG-MIB

CISCO-SYSLOG-

 

CAPABILITY

Describes and stores the system messages 
(syslog messages) generated by the ACE. The 
CISCO-SYSLOG-MIB provides access to the 
syslog messages through SNMP. The MIB 
also contains a history of syslog messages and 
objects to enable or disable the transmission 
of syslog notifications. 

Note

This MIB does not track messages 
that are generated from debug 
commands entered through the CLI. 

Syslog is described by RFC 3164. 

IF-MIB

CISCO-IF-CAPABILITY

Reports generic information on interfaces (for 
example, VLANs). 

The IF-MIB is described in RFC 2863.

Note

The Ethernet data port and 
port-channel interfaces are available 
only in Admin context. In this case, 
the IF-MIB supports all the interfaces 
for Admin contexts, while each 
individual user context supports only 
VLAN and BVI interfaces.

IP-MIB

CISCO-IP-CAPABILITY

Defines managed objects for managing 
implementations of the IP and its associated 
Internet Control Message Protocol (ICMP), 
but excludes their management of IP routes.

The IP-MIB is described in RFC 4293. 

SNMPv2-MIB

CISCO-SNMPv2-

 

CAPABILITY

Provides the Management Information Base 
for SNMPv2. The management protocol, 
SNMPv2, provides for the exchange of 
messages that convey management 
information between the agents and the 
management stations. 

The SNMPv2-MIB is described in RFC 3418.

Table 8-1

SNMP MIB Support (continued)

MIB Support

Capability MIB

Description

Summary of Contents for 4700 series



































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 4700 series

IBM 2210 Installation And Initial Configuration Manual preview
2210
Brand: IBM Pages: 72
Vanguard 342 Quick Reference Manual preview
342
Brand: Vanguard Pages: 4
Microsoft Azure StorSimple 8100 Hardware Installation Manual preview
Azure StorSimple 8100
Brand: Microsoft Pages: 12
Idis DR-8432 Installation Manual preview
DR-8432
Brand: Idis Pages: 31
Patton electronics SMARTNODE 4552 Getting Started Manual preview
SMARTNODE 4552
Brand: Patton electronics Pages: 65
BSS Audio EC-4B Installation Manual preview
EC-4B
Brand: BSS Audio Pages: 20
CELOT CTR-180 User Manual preview
CTR-180
Brand: CELOT Pages: 34
TP-Link TL-MR3220 Quick Installation Manual preview
TL-MR3220
Brand: TP-Link Pages: 87
Dahua D-NVR4108HS-4KS2/L Quick Start Manual preview
D-NVR4108HS-4KS2/L
Brand: Dahua Pages: 33
HPE FlexNetwork 5130 Series Troubleshooting Manual preview
FlexNetwork 5130 Series
Brand: HPE Pages: 33
DCB BROADCAST POLLING FRAD BPF-14 BU Manual preview
BROADCAST POLLING FRAD BPF-14 BU
Brand: DCB Pages: 28
Zoom Realtek Series User Manual preview
Realtek Series
Brand: Zoom Pages: 31
ZyXEL Communications P-2602H Series Specifications preview
P-2602H Series
Brand: ZyXEL Communications Pages: 2
TP-Link TL-WR703N Quick Installation Manual preview
TL-WR703N
Brand: TP-Link Pages: 17
MikroTik wAP series User Manual preview
wAP series
Brand: MikroTik Pages: 5
MikroTik C52iG-5HaxD2HaxD-TC Quick Manual preview
C52iG-5HaxD2HaxD-TC
Brand: MikroTik Pages: 23
MikroTik CCR2004-16G-2S+PC Quick Manual preview
CCR2004-16G-2S+PC
Brand: MikroTik Pages: 20
QNAP TVS- 72XU Series User Manual preview
TVS- 72XU Series
Brand: QNAP Pages: 56

Brands by name

Popular brands

Load more brands