Chapter 7 Configuring Redundant ACE Appliances
Displaying Redundancy Information
7-44
Cisco 4700 Series Application Control Engine Appliance Administration Guide
OL-11157-01
My State
State of the FT group member in the local ACE. Possible
states are:
•
FSM_FT_STATE_INIT—Configuration for the FT
group exists but the group is not in service. This is the
initial state for each member (local and peer) of an FT
group.
•
FSM_FT_STATE_ELECT—When you configure the
inservice
command for an FT group, the local group
member enters this state. Through the election process,
the local context negotiates with its peer context in the
FT group to determine their states. One member enters
the ACTIVE state and the other member enters the
STANDBY_CONFIG state.
•
FSM_FT_STATE_ACTIVE—Local member of the FT
group is active and processing flows.
•
FSM_FT_STATE_STANDBY_COLD—State that
indicates if the FT VLAN is down but the peer device
is still alive, or the configuration or application state
synchronization failed. When a context is in this state
and a switchover occurs, the transition to the ACTIVE
state is stateless.
•
FSM_FT_STATE_STANDBY_CONFIG—Local
standby context is waiting to receive configuration
information from its active peer context in the FT
group. The active peer context receives a notification
to send a snapshot of its running-configuration file to
the local standby context.
•
FSM_FT_STATE_STANDBY_BULK—Local
standby context is waiting to receive state information
from its active peer context. The active peer context
receives a notification to send a snapshot of the current
state information for all applications to the standby
context.
Table 7-2
Field Descriptions for the show ft group Command Output
(continued)
Field
Description
