Chapter 1 Setting Up the ACE
Configuring the Time, Date, and Time Zone
1-20
Cisco 4700 Series Application Control Engine Appliance Administration Guide
OL-11157-01
•
start_day end_day—
The day, ranging from Sunday through Saturday.
•
start_month end_month—
The month, ranging from January through
December.
•
start_time end_time—
Time, in military format, specified in hours and
minutes.
•
daylight_offset—
Number of minutes to add during the summer time. Valid
entries are from 1 to 1440.
•
standard
timezone
—Displays a list of well known time zones that include an
applicable daylight time start and end range along with a daylight offset.
Available choices are:
–
ADT
—Atlantic Daylight Time: 2 am on the first Sunday in April to 2 am
on the last Sunday in October, +60 min
–
AKDT
—Alaska Standard Daylight Time: 2 am on the first Sunday in
April to 2 am on the last Sunday in October, +60 min
–
CDT
—Central Daylight Time: 2 am on the first Sunday in April to 2 am
on the last Sunday in October, +60 min
–
EDT
—Eastern Daylight Time: 2 am on the first Sunday in April to 2 am
on the last Sunday in October, +60 min
–
MDT
—Mountain Daylight Time: 2 am on the first Sunday in April to 2
am on the last Sunday in October, +60 min
–
PDT
—Pacific Daylight Time: 2 am on the first Sunday in April to 2 am
on the last Sunday in October, +60 min
For example, to specify that summer time begins on the first Sunday in April at
02:00 and ends on the last Sunday in October at 02:00, with a daylight offset of
60 minutes, enter:
host1/Admin(config)#
clock summer-time Pacific 1 Sun Apr 02:00 5 Sun
Oct 02:00 60
To remove the clock summer-time setting, use the
no
form of this command. For
example, enter:
host1/Admin(config)#
no clock summer-time
