manualshive.com logo in svg

Cisco 4700 series, Administration Manual

The Cisco 4700 series Configuration Manual is a comprehensive and user-friendly guide that provides step-by-step instructions for setting up and optimizing your Cisco 4700 series product. This essential manual is available for free download exclusively at manualshive.com, offering users easy access to valuable information to enhance their product experience.

Share
Download
background image

    R E V I E W   D R A F T   -   C I S C O   C O N F I D E N T I A L

Chapter 9      Configuring the XML Interface

Enabling the Display of Raw XML Request show Command Output in XML Format

9-24

Cisco 4700 Series Application Control Engine Appliance Administration Guide

OL-11157-01 

Enabling the Display of Raw XML Request show 
Command Output in XML Format

By default, XML responses will automatically appear in XML format if the 
corresponding CLI 

show

 command output supports the XML format. However, if 

you are running commands on the CLI console or you are running raw XML 
responses from NMS, the XML responses appear in regular CLI display format.

You can enable the display of raw XML request 

show

 command output in XML 

format by performing one of the following actions:

  •

Specifying the 

xml-show on

 command in Exec mode from the CLI, or 

  •

Including the 

xml-show on

 command in the raw XML request itself (CLI 

commands included in an XML wrapper).

Specification of the 

xml-show on

 command is not required if you are running true 

XML (as shown in the example below). 

For details on the 

show

 command output supported in XML format, consult the 

ACE DTD file, ace_appliance.dtd, that is included as part of the software image 
(see the 

“Accessing the ACE DTD File”

 section). The ACE DTD File contains the 

information on the XML attributes for those 

show

 commands whose output 

supports XML format.

For example, if you specify the 

show interface vlan 10

 

command, the DTD for 

the

 show interface

 command appears as follows:

<!-- 

interface-number is req for show-type vlan | bvi.

interface-number is between 1 and 4095 for vlan and 8191 for bvi.

-->

<!ENTITY % show-interface 

    "interface-type      (vlan | bvi)      #IMPLIED

     interface-number      CDATA           #IMPLIED”

>

The XML representation of the 

show interface 

command appears as follows:

<show_interface interface-type='vlan' interface-number='10'/>

Summary of Contents for 4700 series



































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 4700 series

Hama 53107 Operating Instruction preview
53107
Brand: Hama Pages: 10
ICP DAS USA ET-7000 series Quick Start Manual preview
ET-7000 series
Brand: ICP DAS USA Pages: 14
ICP DAS USA I-2533 User Manual preview
I-2533
Brand: ICP DAS USA Pages: 25
ICP DAS USA ET-2200 Series Manual preview
ET-2200 Series
Brand: ICP DAS USA Pages: 15
ICP ZT-2550 Quick Start Manual preview
ZT-2550
Brand: ICP Pages: 14
Mafell LO 65 Ec Translation Of The Original Operating Instructions preview
LO 65 Ec
Brand: Mafell Pages: 162
Pakedge Device & Software X-Series Quick Start Manual preview
X-Series
Brand: Pakedge Device & Software Pages: 20
Paradyne COMSPHERE 3800 Series Release Note preview
COMSPHERE 3800 Series
Brand: Paradyne Pages: 88
Paradyne COMSPHERE 3800PLUS Supplementary Manual preview
COMSPHERE 3800PLUS
Brand: Paradyne Pages: 5
Paradyne Hotwire 6212 Quick Installation Instructions preview
Hotwire 6212
Brand: Paradyne Pages: 2
AT&T Nighthawk M6 Pro Let'S Get Started preview
Nighthawk M6 Pro
Brand: AT&T Pages: 2
ADC HiGain HLU-231 List 8F Quick Installation preview
HiGain HLU-231 List 8F
Brand: ADC Pages: 7
IEI Technology PUZZLE-IN003B User Manual preview
PUZZLE-IN003B
Brand: IEI Technology Pages: 86
Dahua Technology Lite N42B1P Series Quick Start Manual preview
Lite N42B1P Series
Brand: Dahua Technology Pages: 14
Compaq StorageWorks AIT 35GB AutoLoader Overview And Installation preview
StorageWorks AIT 35GB AutoLoader
Brand: Compaq Pages: 4
Jøtul ERS 01 Operation And Maintenance Manual preview
ERS 01
Brand: Jøtul Pages: 20
Kaptia Klever Getting Started preview
Klever
Brand: Kaptia Pages: 14
Kramer RK-10MT Quick Start Manual preview
RK-10MT
Brand: Kramer Pages: 2

Brands by name

Popular brands

Load more brands