Cisco 4700 series Administration Manual Download Page 198

Page: 198 / 418

Chapter 5 Managing the ACE Software

Saving Configuration Files

5-8

Cisco 4700 Series Application Control Engine Appliance Administration Guide

OL-11157-01

•

dhcp—

(Optional) Displays Dynamic Host Configuration Protocol (DHCP)

information.

•

domain—

(Optional) Displays the list of domains configured for the current

context. The ACE also displays configuration information for each domain
listed.

•

ft—

(Optional) Displays the list of redundancy or fault-tolerance (FT)

configurations configured for the current context. The ACE also displays
configuration information for each ft configuration listed.

•

interface—

(Optional) Displays interface information.

•

parameter-map—

(Optional) Displays parameter map information.

•

policy-map—

(Optional) Displays policy map information.

•

probe—

(Optional) Displays probe information.

•

resource-class—

(Optional) Displays resource class information.

•

role—

(Optional) Displays the list of roles configured for the current context.

The ACE also displays configuration information for each role on the list.

•

rserver—

(Optional) Displays real server information.

•

serverfarm—

(Optional) Displays serverfarm information.

•

sticky—

(Optional) Displays sticky information.

For details on the

show running-config

output associated with the optional

keywords, see the chapters in the ACE documentation set related to the specific
software functions.

For example, to view the entire contents of the running-configuration file on the
ACE, enter:

host1/Admin#

show running-config

Generating configuration....

logging enable

access-list acl1 line 10 extended permit ip any any

rserver type host real1

address 16.1.1.102

inservice

rserver type host real2

address 16.1.1.103

inservice

rserver type host real3

address 16.1.1.105

Summary of Contents for 4700 series



































































































































































































































































































































































































































Search results

Summary of Contents for 4700 series

Reviews:

Related manuals for 4700 series

Brands by name

Popular brands

Cisco 4700 series, Administration Manual

Search results

Summary of Contents for 4700 series

Reviews:

Related manuals for 4700 series

Brands by name

Popular brands