manualshive.com logo in svg

Cisco 4700 series, Administration Manual

The Cisco 4700 series Configuration Manual is a comprehensive and user-friendly guide that provides step-by-step instructions for setting up and optimizing your Cisco 4700 series product. This essential manual is available for free download exclusively at manualshive.com, offering users easy access to valuable information to enhance their product experience.

Share
Download
background image

   

Chapter 7      Configuring Redundant ACE Appliances

Configuring Redundancy

7-12

Cisco 4700 Series Application Control Engine Appliance Administration Guide

OL-11157-01 

Configuring Redundancy

To configure redundancy on the ACE, use the commands in the following 
sections. You must configure the 

ft interface

,

 ft peer

, and 

ft group 

commands on 

all ACEs that participate in the redundancy configuration. This section contains 
the following topics:

  •

Configuring an FT VLAN

  •

Configuring an Alias IP Address

  •

Configuring an FT Peer

  •

Configuring an FT Group

  •

Forcing a Failover

  •

Synchronizing Redundant Configurations

Configuring an FT VLAN

Peer ACEs communicate with each other over a dedicated FT VLAN. These 
redundant peers use the FT VLAN to transmit and receive heartbeat packets and 
state and configuration replication packets. You must configure the same VLAN 
on each peer appliance. You cannot use this dedicated VLAN for normal network 
traffic; it must be dedicated for redundancy only.

To configure one of the Ethernet ports or a port-channel interface on the ACE for 
fault tolerance using a dedicated FT VLAN for communication between the 
members of an FT group, use the 

ft-port vlan

 command in interface configuration 

mode (see the 

Cisco 4700 Series Application Control Engine Appliance Routing 

and Bridging Configuration Guide

). 

Note

When you specify an Ethernet port as a dedicated FT VLAN, you have the option 
to either configure the dedicated VLAN as the only VLAN associated with the 
Ethernet port or to include it as part of a VLAN trunk link (see the 

Cisco 4700 

Series Application Control Engine Appliance Routing and Bridging 
Configuration Guide

). Note that the ACE automatically includes the FT VLAN in 

the VLAN trunk link. If you choose to configure VLAN trunking, it is not 
necessary for you to assign the FT VLAN in the trunk link along with the other 
VLANs.

Summary of Contents for 4700 series



































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 4700 series

DBM ACE9600 Operating Manual preview
ACE9600
Brand: DBM Pages: 50
iDirect iQ Desktop+ Installation, Support, And Maintenance Manual preview
iQ Desktop+
Brand: iDirect Pages: 52
Aztech DSL1000EW(L) Speci?Cations preview
DSL1000EW(L)
Brand: Aztech Pages: 2
Radicom WiFiHU2S-a/c Preliminary Designer’S Manual preview
WiFiHU2S-a/c
Brand: Radicom Pages: 27
D3 DesignCore RVP-TDA3 Series Quick Start Manual preview
DesignCore RVP-TDA3 Series
Brand: D3 Pages: 34
Grundig GSS STC 160 Assembly Instruction Manual preview
GSS STC 160
Brand: Grundig Pages: 24
Baicells EG2013B-M11 User Manual preview
EG2013B-M11
Brand: Baicells Pages: 10
Korenix JetNet 3508-LVDC User Manual preview
JetNet 3508-LVDC
Brand: Korenix Pages: 16
Ubiquiti PBE-M5-400-ISO Quick Start Manual preview
PBE-M5-400-ISO
Brand: Ubiquiti Pages: 28
iNetVu Tachyon CI1300 Quick Start Manual preview
Tachyon CI1300
Brand: iNetVu Pages: 20
Riverbed SteelCentral NetExpress 470 Upgrade And Maintenance Manual preview
SteelCentral NetExpress 470
Brand: Riverbed Pages: 140
Devolo dLAN 200 AVsmart+ Technical Data preview
dLAN 200 AVsmart+
Brand: Devolo Pages: 2
ZyXEL Communications XGS4600 Series User Manual preview
XGS4600 Series
Brand: ZyXEL Communications Pages: 645
YDI WL2400-ISA Installation & Operation Manual preview
WL2400-ISA
Brand: YDI Pages: 16
Juniper EX4600 Hardware Manual preview
EX4600
Brand: Juniper Pages: 230
Patton electronics 593/25, 593/45, 593/TB, RS-422, RS-485 User Manual preview
593/25, 593/45, 593/TB, RS-422, RS-485
Brand: Patton electronics Pages: 8
DataDirect Networks EF2915 Series User Manual preview
EF2915 Series
Brand: DataDirect Networks Pages: 97
Cambium Networks PMP 450i User Manual preview
PMP 450i
Brand: Cambium Networks Pages: 172

Brands by name

Popular brands

Load more brands