Cisco 4700 series Administration Manual Download Page 52

Page: 52 / 418

Chapter 1 Setting Up the ACE

Synchronizing the ACE with an NTP Server

1-26

Cisco 4700 Series Application Control Engine Appliance Administration Guide

OL-11157-01

For example, to display the counters maintained by the local NTP, enter:

switch/Admin#

show ntp statistics local

Table 1-5

describes the fields in the

show ntp statistics local

command output.

Table 1-5

Field Descriptions for show ntp statistics local Command

Field

Description

System uptime

Length of time that the ACE has been running.

Time since reset

Time in hours since the ACE was last rebooted.

Old version packets

Number of packets that match the previous NTP
version. The version number is in every NTP packet.

New version packets

Number of packets that match the current NTP version.
The version number is in every NTP packet.

Unknown version number Number of packets with an unknown NTP version.

Bad packet format

Number of NTP packets that were received and
dropped by the ACE due to an invalid packet format.

Packets processed

Number of NTP packets received and processed by the
ACE.

Bad authentication

Number of packets not verified as authentic.

Dropped packets

Total number of NTP packets dropped by the ACE

Ignored packets

Total number of NTP packets ignored by the ACE

Received packets

Total number of NTP packets received by the ACE

Packets sent

Total number of NTP packets transmitted by the ACE

Packets not sent

Total number of NTP packets not sent by the ACE due
to an error

Interrupts handled

Total number of NTP timer interrupts handled by the
ACE

Received by int

Total number of pulses received that triggered an
interrupt

Table 1-4

Field Descriptions for show ntp statistics io Command (continued)

Field

Description

Summary of Contents for 4700 series



































































































































































































































































































































































































































Search results

Summary of Contents for 4700 series

Reviews:

Related manuals for 4700 series

Brands by name

Popular brands

Cisco 4700 series, Administration Manual

Search results

Summary of Contents for 4700 series

Reviews:

Related manuals for 4700 series

Brands by name

Popular brands