manualshive.com logo in svg

Cisco 4700 series, Administration Manual

The Cisco 4700 series Configuration Manual is a comprehensive and user-friendly guide that provides step-by-step instructions for setting up and optimizing your Cisco 4700 series product. This essential manual is available for free download exclusively at manualshive.com, offering users easy access to valuable information to enhance their product experience.

Share
Download
background image

Chapter A      Upgrading Your ACE Software

Overview of Upgrading ACE Software

A-2

Cisco 4700 Series Application Control Engine Appliance Administration Guide

OL-11157-01 

Overview of Upgrading ACE Software

The ACE comes preloaded with the operating system software. To take advantage 
of new features and bug fixes, you can upgrade your ACE with a new version of 
software when it becomes available.

In the Admin context, you will use the 

copy

 command in Exec mode to manually 

upgrade the ACE software. After the software installation is finished, set the boot 
variable and configuration register to autoboot the software image. Then, reboot 
the appliance to load the new image. 

To minimize any disruption to existing network traffic during a software upgrade 
or downgrade, deploy your ACE appliances in a redundant configuration. For 
details about redundancy, see 

Chapter 7, Configuring Redundant ACE 

Appliances

.

Before You Begin

Before you upgrade your ACE software, please read this appendix in its entirety 
so that you fully understand the entire upgrade process. Please be sure that your 
ACE configurations meet the upgrade prerequisites in the following sections:

  •

Changing the Admin Password

  •

Changing the www User Password

  •

Checking Your Configuration for FT Priority and Preempt

  •

Creating a Checkpoint

Changing the Admin Password

Before you upgrade to software version A1(8.0a) or higher, you must change the 
default Admin password if you have not already done so. Otherwise, after you 
upgrade the ACE software, you will only be able to log in to the ACE through the 
console port. 

See 

Chapter 1, Setting Up the ACE

 for details on changing the admin account 

password. 

Summary of Contents for 4700 series



































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 4700 series

Sangamo CHOICE PR1 User Instructions preview
CHOICE PR1
Brand: Sangamo Pages: 2
APARIAN DH485 Quick Start Manuals preview
DH485
Brand: APARIAN Pages: 2
Linksys NSLU2 - Network Storage Link NAS Server Quick Installation Manual preview
NSLU2 - Network Storage Link NAS Server
Brand: Linksys Pages: 64
TRENDnet TEW-733GR User Manual preview
TEW-733GR
Brand: TRENDnet Pages: 62
4G Systems XSBox MOVE Quick Start Manual preview
XSBox MOVE
Brand: 4G Systems Pages: 2
G&D DL-DVI-Vision-IP Series Installation And Operation Manual preview
DL-DVI-Vision-IP Series
Brand: G&D Pages: 228
Patton DiamondLink 3201 Quick Start Manual preview
DiamondLink 3201
Brand: Patton Pages: 12
Fastech Ezi-SERVOII EtherCAT TO User Manual preview
Ezi-SERVOII EtherCAT TO
Brand: Fastech Pages: 108
Global411 MS41p1 Quick Installation Manual preview
MS41p1
Brand: Global411 Pages: 15
DCB BROADCAST POLLING FRAD BPF-14 BU Manual preview
BROADCAST POLLING FRAD BPF-14 BU
Brand: DCB Pages: 28
Intel IXP45X Developer'S Manual preview
IXP45X
Brand: Intel Pages: 958
Supero SUPERSERVER 6027TR-H71FRF User Manual preview
SUPERSERVER 6027TR-H71FRF
Brand: Supero Pages: 118
MiWire SeaWire Pro User Manual preview
SeaWire Pro
Brand: MiWire Pages: 24
JAKA MiniCab Hardware User Manual preview
MiniCab
Brand: JAKA Pages: 37
Socket CF Card User Manual preview
CF Card
Brand: Socket Pages: 28
Addonics Technologies Network Adapter ADZIFCF Installation Manual preview
Network Adapter ADZIFCF
Brand: Addonics Technologies Pages: 1
Juniper TX MATRIX Hardware Manual preview
TX MATRIX
Brand: Juniper Pages: 396
Hanwha Techwin Wisenet PRN-6400DB4 User Manual preview
Wisenet PRN-6400DB4
Brand: Hanwha Techwin Pages: 125

Brands by name

Popular brands

Load more brands