4-29
Cisco 4700 Series Application Control Engine Appliance Administration Guide
OL-11157-01
Chapter 4 Configuring Class Maps and Policy Maps
Configuring Layer 3 and Layer 4 Class Maps
The syntax of this command is:
[
line_number
]
match any
The optional
line_number
argument to identify individual
match
commands to
help you edit or delete them. Enter an integer from 2 to 255 as the line number.
You can enter
no
line_number
to delete long
match
commands instead of entering
the entire line. The line numbers do not dictate a priority or sequence for the
match statements.
For example, to specify that the class map is to match on any network traffic,
enter:
host1/Admin(config)#
class-map match-any L4_MATCHANYTRAFFIC_CLASS
host1/Admin(config-cmap)#
match any
To remove the match any criteria from the class map, enter:
host1/Admin(config-cmap)#
no match any
Defining Destination IP Address and Subnet Mask Match Criteria
To specify the destination IP address and subnet mask as the Layer 3 and Layer 4
network traffic matching criteria, use the
match destination-address
command
in class map configuration mode.
The syntax of this command is:
[
line_number
]
match destination-address
ip_address mask
The arguments are:
•
line_number
—(Optional) Line number to identify individual
match
commands. Enter an integer from 2 to 255 as the line number. You can enter
no
line_number
to delete long
match
commands instead of entering the entire
line. The line numbers do not dictate a priority or sequence for the match
statements.
•
ip_address
—Destination IP address. Enter the IP address in dotted-decimal
notation (for example, 192.168.11.1).
•
mask
—Subnet mask entry in dotted-decimal notation (for example,
255.255.255.0).
