DynaGen
TM
TOUGH Series
TM
TE410 - EN
User Manual
32
9M02-9249-A001-EN
Revision A
4
Using the Controller
The LCD display is the primary source of information from the controller. It allows you to view/change settings
and monitor the status of sensors and other engine peripherals.
Using the Menu System
Task
Description
Entering Menu
When in the Off Mode, press the Enter button to bring up the menu.
Navigating Menu
Once in the menu, use the up and down arrows to navigate. Pressing Enter will
move you into that menu.
Change a Setting
Scroll to the desired value and press Enter to select. A check mark should
appear beside that item. Press Enter again to save the setting and return to the
previous screen.
Scroll Parameters
When in Auto or Running Mode, pressing the up and down arrows will scroll
through the parameter pages.
Lock Screen
When in Auto or Running Mode, the screen can be locked to a certain parameter
page by pressing Auto and unlocked by pressing Auto again.
Events History
Once in the menu, select Events History to view the most recent controller event.
Use the up and down arrows to navigate to other events. The controller can
store up to 150 events. If more than 150 events occur, the oldest event is
deleted to make room for the next event.
Front Panel Items
Item / Symbol
Name
Description
OFF Button
Used for turning off the engine or exiting out of Auto Mode. This is
not intended to function as an Emergency Stop as there are
conditions in which it will not shut down the engine. See the
AUTO Button
Used for placing the controller into Auto Mode or locking the LCD
screen when viewing parameters. Once in Auto Mode, the
controller waits for a start command to be received.
RUN Button
Used to start the engine manually. The OFF button must be used to
shut down the engine if it has been started using the front panel.
Summary of Contents for DYNAGEN TOUGH Series TE410
Page 1: ...TOUGH SeriesTM TE410 User Manual ...
Page 22: ...DynaGenTM TOUGH SeriesTM TE410 EN User Manual 22 9M02 9249 A001 EN Revision A CT Wiring ...
Page 24: ...DynaGenTM TOUGH SeriesTM TE410 EN User Manual 24 9M02 9249 A001 EN Revision A ...
Page 28: ...DynaGenTM TOUGH SeriesTM TE410 EN User Manual 28 9M02 9249 A001 EN Revision A ...