Case 2050M, Operator'S Manual, Page: 206 / 286

7 - MAINTENANCE
Fuel filter (Initial)
WARNING
Fire hazard!
When handling diesel fuel, observe the following precautions:
1. Do not smoke.
2. Never fill the tank when the engine is running.
3. Wipe up spilled fuel immediately.
Failure to comply could result in death or serious injury.
W0099A
Change the fuel filter when the hour meter registers 100 hours for a new machine during the initial run-in period. Fuel
filters should be changed every 500 hours thereafter or more frequently when operating conditions are severe.
Prior operation:
Keep all unauthorized personnel clear of the area. Park the machine on level ground, in neutral with the parking
brake applied, and the attachment lowered to the ground. Make sure that all residual pressure is relieved from circuits
before beginning maintenance.
1. Locate the fuel filter in the right rear access compart-
ment. Close the fuel shut off valve (1) to prevent fuel
leakage.
2. Clean the fuel filter head, the outside of the fuel filter,
and remove any dirt and debris around the area that
might contaminate the system.
RAIL13DOZ1686AA
1
3. Turn the fuel filter (2) counterclockwise and remove.
Capture any fuel remaining in the lines or the fuel filter,
and discard properly.
4. Apply a thin layer of clean oil to the gasket on the new
fuel filter.
5. Install the filter. Use your hands to tighten the fuel filter
1/2 to 3/4 turn after the fuel filter makes contact with the
filter head.
6. Check for leaks.
RAIL13DOZ1699AA
2
NOTICE: Never use a filter wrench to tighten a new fuel filter on install.
7-50