Case 2050M, Operator'S Manual, Page: 190 / 286

7 - MAINTENANCE
Grease points
WARNING
Improper operation or service of this machine can result in an accident.
Read and understand the SAFETY INFORMATION Section before you perform any maintenance, ser-
vice, or repairs. Read and understand the specific service procedures for the components you plan
to work with before you start servicing the machine.
Failure to comply could result in death or serious injury.
W0138A
WARNING
Avoid injury! Always do the following before lubricating, maintaining, or servicing the machine.
1. Disengage all drives.
2. Engage parking brake.
3. Lower all attachments to the ground, or raise and engage all safety locks.
4. Shut off engine.
5. Remove key from key switch.
6. Switch off battery key, if installed.
7. Wait for all machine movement to stop.
Failure to comply could result in death or serious injury.
W0047A
Prior operation:
Keep all unauthorized personnel clear of the area. Park the machine on level ground, in neutral with the parking
brake applied, and the attachment lowered to the ground. Make sure that all residual pressure is relieved from circuits
before beginning maintenance.
Lubricate the machine and attachments with
T
UTELA
M
OLY
G
REASE
GR-75 when the hour meter registers 10 hours
of operation and every 10 hours thereafter. Lubricate more frequently if conditions so require.
Clean around the area to be greased before service.
NOTE: In severe conditions, such as immersion in water, it may be necessary to grease more frequently.
7-34