Case 2050M, Operator'S Manual, Page: 20 / 286

1 - GENERAL INFORMATION
Emissions warranty does not cover
• Repairs arising from storage deterioration, failure to maintain the equipment, negligence, alteration, improper use
of the equipment, collision or other accident, vandalism, or other casualty, or operation beyond rated capacity or
specification.
• Repairs arising from abuse or neglect, including but not limited to: operation without adequate coolant or lubricants,
adjustments to the fuel system outside equipment specifications, over-speeding, improper storage, starting, warm-
up, or shutdown practices, incorrect fuel or contaminated fuel, oil or other fluids.
• Normal maintenance services, such as engine tune-ups, engine fuel system cleaning, checks, adjustments, shim-
ming, etc.
• Items replaced due to customer demand.
• Labor charges performed by anyone except a dealer authorized by contract to repair the equipment, unless they
qualify under special provisions (i.e. outside labor).
• Any and all travel costs for items such as towing, service calls, or transporting a unit to and from the place where
the warranty service is performed.
• Normal maintenance costs, including but not limited to: lubricants, coolants, fluids, fuel, filters, and associated labor.
Lubricants, filters, and coolants may qualify for warranty reimbursement if they require replacement as a DIRECT
RESULT of a defect in material or workmanship.
• Claims involving the inspection or reconditioning of units after storage or prior use.
• Repairs arising from service performed by agents not approved by CASE CONSTRUCTION.
• Repairs arising from any unauthorized modification to the product or the use of non- CASE CONSTRUCTION parts,
implements or attachments.
• Removal, replacement, or installation of non- CASE CONSTRUCTION optional equipment, attachments or com-
ponents.
• Premiums charged for overtime labor costs or out of shop expenses.
• Economic loss including lost profits, crop loss, equipment rental, or other expense.
• Unauthorized modification or updating machines without a warrantable failure.
• Any and all costs of dealer shop supplies incurred with repairs, including but not limited to: solvents, cleaners,
anti-seize lubricants, loctite, sealant, adhesive, oil-dry, shop towels, etc.
• Failure of the machine, its implements or attachments caused by improper field application or loading.
• Any and all costs for coolant, fuel, or lube (oil) analysis including supplies and lab recommendations.
• Cost associated with cleaning of machine in preparation for servicing.
1-14