Case 2050M, Operator'S Manual, Page: 144 / 286

6 - WORKING OPERATIONS
Bulldozer blade — Push beam centering
1. Set the bulldozer blade on a level surface. Make sure
the blade is even when it rests on the ground.
2. Raise the blade slightly off the ground.
RAIL14DOZ0525AA
9
3. Remove the bolts (A) , (B) from both ends of the left-
hand (C) and right-hand (D) turnbuckles to allow move-
ment of the turnbuckle body (E) .
RAPH15DOZ0008BA
10
4. Extend the left-hand turnbuckle (C) (rotate 1/2 turn)
counter-clockwise when positioned behind the blade
as shown. Extend the right-hand turnbuckle (rotate
1/2 turn) counter-clockwise when positioned behind the
blade. Continue to alternately turn each turnbuckle un-
til both turnbuckles are tight.
RAIL14DOZ0529AA
11
6-8