Case 2050M, Operator'S Manual, Page: 170 / 286

7 - MAINTENANCE
Cab floor and seat access
Keep all unauthorized personnel clear of the area. Park the machine on level ground, in neutral with the parking
brake applied, and the attachment lowered to the ground. Make sure that all residual pressure is relieved from circuits
before beginning maintenance
Hoses and components that do not require routine
operator maintenance are located beneath the cab
floor and seat. If necessary, you can access these
components as follows:
1. Remove the screws from the floor mat along both door
thresholds.
2. Lift the mat over the foot pedals and remove the mat
from the cab.
RAIL12DOZ0232AA
1
3. Slide the operator’s seat all the way forward.
4. Tilt the operator seat back down.
5. Remove the armrests to prevent obstruction.
RAPH12DOZ0074AA
2
6. Remove the bolts from each side of the lower front seat
frame (one per side).
RAPH12DOZ0075AA
3
NOTE: The seat will automatically spring upward and to-
wards the back of the cab.
7-14