Carel k.Air, User Manual, Page: 43 / 192

43
Commissioning k.air +030220981 rel. 1.2 - 01.12.2020
8. COMMISSIONING
Before commissioning the unit, check that:
• the working voltage range is correct;
• the power cables are sized correctly;
• all of the controller’s inputs are connected correctly.
k.Air must be commissioned from the pGDE user terminal.
Note:
k.Air is factory set for correct display on a pGDE terminal with address 32 in the pLAN network (default); for more details
on using the terminal, see 0300057EN.
After powering on the controller, k.Air provides the possibility to select the user interface language from the options available
(Italian, English). If no setting is made within 30 s from when the selection screen is displayed, the user interface is set in English
and the next screen is shown.
Language: ITALIAN
Enter to change
Esc to confirm
Language Xb01
Show at start up: 30s
30220980_092_R01
Nota:
the language can be changed subsequently under Settings . Language, accessible by pressing Prg and scrolling
with , , .
After having selected the language, the controller shows a selection screen for confi guring the unit, with the following options:
• confi gurations already pre-loaded on the k.Air controller;
• a custom confi guration fi le saved to USB pen drive;
• Auto-Backup confi guration, an automatic backup that is performed every time the unit is switched on;
• skip importing the confi guration from fi le and proceed with manual confi guration.
Note:
to proceed, the user must choose from the four available options, otherwise the display will remain on this screen.
Import/export:
IMPORT
Memory type:
INTERNAL FLASH MEMORY
File name:
KAIR_CONF_1
Configuration Ac99
Confirm: NO
30220980_093_R01
8.1 C hoose pre-loaded confi guration
Procedure
1. Press
and select ‘’PRELOADED’’ using , ;
2. confi rm by pressing ;
3. select the number of the confi guration fi le using , , ;
4. confi rm the selection by setting “YES” using , and then press .
Important: unplug any USB cables connected to the USB device port before proceeding with the confi guration.
Note: for a complete list of the confi gurations preloaded on the k.Air controller, see the do3000204.