Canon iR C3380 series, Service Manual

Page: 370 / 610

Chapter 11
11-8
F-11-14
In the case the device authentication method is SDL
F-11-15
11.1.5 Checking Application List
0014-8069
/ / / / iR C3380i / iR C3380 / iR C2880i / iR C2880
The page of Application List is designed to show resources arranged according to applications. The page gives you a good idea of how much of the device's memory
is being used by the applications (both in absolute and relative terms) as well as how much memory still remains. Check this page before adding an application.
The information is collected from the manifest (headers) - in other words, the size of a resource represents the size as it is declared by the application in question,
not necessarily the size of resources actually used by the application. The items of information include the following:
- hard disk
- memory
- thread
- socket
- file descriptor
You will not be able to install an application if the size of the remaining memory falls short of the size declared by the application. Moreover, the specifications
have been designed so that an application will not be able to start up if there is a shortage of memory for any of the foregoing items (i.e., memory, thread, socket,
file descriptor). To find out if there is enough memory, go through the following steps:
1) Log in to SMS.
2) Click Application List tab.
3) Check the displayed information:
a. Information on Applications
- Name (of the application)
- Installation (date)
- Application ID
- Status
- License
- Resources Used
b. Resource Information
- Amount Used
- Remaining
- Percent Used