Canon iR C3380 series, Service Manual

Page: 532 / 610

Chapter 17
17-48
TEMP-TBL Fixing temperature regulation temperature table change
This is used to adjust the temperature of the temperature regulation for the regular paper (64 to 105g paper) uniform
speed. It improves the hot offset or fixability at the regular paper uniform speed.
Settings
-2:-10 deg C
-1:-5 deg C
0:0 deg C
+1:5 deg C
+2:+10 deg C
[Factory setting/value after clearing RAM: 0]
1
W/SCNR For copy models, sets whether scanner is present.
Caution!
The setting value takes effect after the main power switch is turned OFF/ON.
Setting values
0: Printer model
1: Model with scanner
Reference:
The setting will automatically change to '1' upon detection of the presence of a scanner (printer model).
1
RUI-DSP Used to select copy function in remote UI.
0: Display copy the screen in remote UI [Factory default/After RAM clear]
1: Don't display copy screen in remote UI
1
ADJ-LVL Sets execution mode for image stabilization control performed after preset number of sheets.
Sets execution mode (adjustment set data) for forward/reverse operation of copy or print jobs and image stabilization
control done between sheets.
Reference:
Automatic adjustment control execution mode setting
This makes it possible to reduce the wait time of the users by reducing the menu items to be executed by automatic
adjustment. The automatic adjustment control is executed for Dmax control, Dhalf and ARCDAT.
However, the fluctuations in the image density increase unless the process automatic adjustment is executed from the
user mode.
0: BkDmax c Dhalf and ARCDAT are executed.
1: BkDmax c Dhalf are executed. ARCDAT is not executed.
2: ARCDAT is executed. BkDmax c Dhalf are not executed.
3: Neither BkDmax c Dhalf nor ARCDAT are executed.
[Factory setting/value after clearing RAM: 0]
1
DFDST-L1 A higher setting will increase the level of dust detection (i.e., the machine will be more sensitive in detecting dust, which
if left behind will cause thin lines in the images).
settings range
0 to 255 (0: off)
[Factory default/After RAM clear: 205]
1
DFDST-L2 A higher setting will increase the level of dust detection (i.e., the machine will be more sensitive in detecting dust, which
if left behind will cause thin lines in the images).
settings range
0 to 255 (0: off)
[Factory default/After RAM clear: 155]
1
ENVP-INT Setting log correction interval of inner machine temperature/humidity/fixing temperature
Setting log collection interval to COPIER>FUNCTION>MISC-P>ENV-PRT and COPIER>DISPLAY>ENVRNT
Settings
0 to 480 <min>
[Factory default/After RAM clear: 60]
Reference Log is not collected when '0' is set.
1
CNTR-DSP Selecting screen in response to the external controller
Settings
0: The external controllericon is displayed on the control panel of the copier[Factory default/After RAM clear]
(When the color image server is connected.)
1: The control panel of the copier becomes nondisplay mode
(When the control panel-mounted external controller is connected.)
1
BASE-SW Switching from MEAP-Full model to MEAP-Base model
This is used when trouble originating in the MEAP application has occurred. The MEAP application operation can be
restricted by setting it to "0."
Settings
0: Base model
1: Full model
[Factory setting/value after clearing RAM: 1]
MEMO:
The model can be switched from "1" to "0" only.
1
SC-L-CNT Switching of sheet size large/small threshold value in scan counter
This sets the https server port when SSL is used by HTTP of MEAP.
0: B4 size sheets are counted as the small size.
1: Letter size sheets are counted as the small size.
[Factory setting/value after clearing RAM: 0]
1
REPORT-Z Report print attribute flag function control
Switches attribute flags added to report prints.
Setting values
0: PDL text mode
1: PDL photograph mode
2: SCAN text mode
3: SCAN photograph mode
[Factory settings and after RAM clear: 0]
1
COPIER>OPTION>BODY