Canon iR C3380 series, Service Manual

Page: 548 / 610

Chapter 17
17-64
CNCT-RLZ Connection serializing function ON/OFF
This selects whether to use the connection serializing function.
Settings
0: Connection serializing function OFF
1: Connection serializing function ON
[Factory setting/value after clearing RAM: 0]
Reference:
- Connection serializing function
This function serves to guarantee the job grouping function of imageWARE Output Manager Select Edition V1.0. Since
iR machines and other MFP machines support multiple connections, the job grouping function is guaranteed by
establishing in the machine a setting which will not accept multiple connections. When this item is set to "1," until the
reception of the job data of a particular connection is completed, the job data of another connection will not be received,
thereby preventing the rearranging of jobs.
- Connection
This refers to a connection which is established through the network between a multiple number of hosts (such as PCs).
- Job grouping function
This is a function of imageWARE Output Manager Select Edition V1.0. It
2
2C-CT-SW Colour counter (restricted to two colour mode) switch
In 2 colour mode, switches the incremental counter between full colour and mono-colour.
Setting values
0: Mono-colour counter
1: Full colour counter
[Factory settings and after RAM clear: 1]
2
JA-FUNC Job archive function ON/OFF
0: OFF
1: ON
[Factory setting/value after clearing RAM: 0]
2
JA-JOB Specification of jobs targeted for job archive
0: None
3: Limited to FAX/IFAX
0xFFFFFFFF: All jobs
[Factory setting/value after clearing RAM: 0]
2
JA-RESTR Job archive restriction item setting
Bit 0: Image file capture function (0: OFF, 1: ON)
Bit 1: Form registration combination function (0: OFF, 1: ON)
Bit 2: Document editing function (0: OFF, 1: ON)
[Factory setting/value after clearing RAM: 0]
2
DOM-ADD Sets domain complement for transmission destination when sending email.
Sets whether to complement the domain (e.g. @canon.co.jp) programmed in the user mode to the entered account when
transmitting email.
Setting values
0: Do not complement Tx destination domain.
1: Complement Tx destination domain.
[Factory settings and after RAM clear: 0]
2
JA-DPI Specifies job archive record resolution.
For jobs other than PC-FAX, FAX Rx, IFAX Rx, etc., the resolution is converted to the programmed resolution and an
archive image is recorded.
*The settings cannot be changed in service mode, but only referenced. Settings can only be made from a job archive-
enabled MEAP programme.
Setting values
0 : No not convert resolution.
1: 100 x 100 dpi
2: 200 x 200 dpi
3: 300 x 300 dpi
[Factory settings and after RAM clear: 3]
2
JA-COMPR Specifies job archive record compression rate.
For jobs other than PC-FAX, FAX Rx, IFAX Rx, etc., the compression rate is converted to the programmed compression
rate and an archive image is recorded.
Setting values
0: Do not convert compression rate (use same compression table as original image).
1: 1/4 compression
2: 1/8 compression
3: 1/16 compression
4: 1/32 compression
5: 1/64 compression
[Factory settings and after RAM clear: 3]
2
PDL-NCSW Print job card control mode setting
This targets the PDL print jobs to be controlled using NewCard.
Settings
0: PDL print jobs are accepted and output by the machine regardless of whether NewCard has been inserted.
1: PDL jobs are not printed if NewCard is not inserted and the division ID does not match. PDL jobs are printed if
NewCard is inserted and the division ID of the jobs matches the card ID.
[Factory setting/value after clearing RAM: 0]
2
COPIER>OPTION>USER
Specification selection related to user mode
Sub item Description level.