Canon iR C3380 series, Service Manual

Page: 467 / 610

Chapter 16
16-5
0001 Checksum error Check on connection between the ADF controller PCB
and the main controller PCB (sub), Replace the ADF
controller PCB, Replace the main controller PCB (sub)
0002 Reception status error
0003 Reception interrupt error
E490 Model error
0001 Feeder for other model is detected. Connect an appropriate feeder
E500 Finisher communication error
0001 Communication error is detected between the main body and the finisher for specific
times and specific period of time.
Check on connection between the DC controller PCB
and the finisher controller PCB, Replace the finisher
controller PCB, Replace the DC controller PCB
E503 *** Finisher internal communication error
0002 Communication error between the finisher and the saddle unit Check on connection between the saddle stitcher
controller PCB and the finisher controller PCB,
Replace the finisher controller PCB, Replace the
saddle stitcher controller PCB
0003 Communication error between the finisher and the puncher unit Check on connection between the puncher controller
PCB and the finisher controller PCB, Replace the
finisher controller PCB, Replace the puncher
controller PCB
E505 Finisher backup memory error
0001 Data stored in the backup memory is abnormal. Check on connection between the DC controller PCB
and the finisher controller PCB, Replace the finisher
controller PCB, Replace the DC controller PCB
**** 0002 Abnormality of puncher unit EEPROM data Check on connection between the puncher controller
PCB and the finisher controller PCB, Replace the
finisher controller PCB, Replace the puncher
controller PCB
E514 *** Stack delivery error / **** End assist motor error
*** 0001 The HP sensor fails to be ON within 1500ms after the return belt starts to move to its
HP.
Check on a drive of the stack retaining roller, Replace
the return belt U-turn HP sensor (SR5) , Replace the
stack delivery motor (M2)
*** 0002 The HP sensor fails to be OFF within 1500ms after the return belt starts to move to the
belt contact position.
**** 0001 The HP sensor fails to be OFF after the end assist motor rotates for a specific period of
time.
Replace the end assist HP sensor (PI39) , Replace the
end assist motor (M39)
**** 0002 The HP sensor fails to be ON after the end assist motor rotates for a specific period of
time.
E519 **** Gear change motor error
0001 The HP sensor fails to be OFF after the gear change motor rotates for a specific period
of time.
Replace the gear change HP sensor (PI49) , Replace
the gear change motor (M40)
0002 The HP sensor fails to be ON after the gear change motor rotates for a specific period
of time.
E530 *** Rear alignment error / **** Front alignment error
*** 0001 The HP sensor fails to be ON within 2000ms after the rear adjuster plate starts to move
to its HP.
Replace the rear adjuster plate HP sensor (SR4) ,
Replace the rear adjuster plate motor (M4)
*** 0002 The HP sensor fails to be OFF within 1000ms after the rear adjuster plate starts to move
from its HP.
**** 0001 The HP sensor fails to be OFF after the front jog motor rotates for a specific period of
time.
Replace the front adjuster plate HP sensor (PI36) ,
Replace the front adjuster plate motor (M33)
**** 0002 The HP sensor fails to be ON after the front job motor rotates for a specific period of
time.
E531 Staple error
*** 0001 The HP sensor fails to be ON within 500ms after the staple motor starts to drive in the
reverse direction to recover from a staple jam.
Replace the stapling HP sensor (SR18) , Replace the
staple motor (M9)
*** 0002 The HP sensor fails to be OFF within 500ms after the staple motor starts to drive.
**** 0001 The HP sensor fails to be OFF after the staple motor rotates for a specific period of time. Replace the staple HP sensor (PI50) , Replace the
staple motor (M41)
**** 0002 The HP sensor fails to be ON after the staple motor rotates for a specific period of time.
E532 Staple unit shift error
*** 0001 The HP sensor fails to be ON within 11000ms after the staple unit starts to move to the
stapling HP.
Replace the stapler slide HP sensor (SR6) , Replace the
stapler slide motor (M8)
*** 0002 The HP sensor fails to be OFF within 1000ms after the staple unit starts to move from
its HP.
**** 0001 The HP sensor fails to be OFF after the staple shift motor rotates for a specific period
of time.
Replace the stapler shift HP sensor (PI50) , Replace the
stapler shift motor (M35)
**** 0002 The HP sensor fails to be ON after the stapler shift motor rotates for a specific period
of time.
E535 Swing error
*** 0001 The HP sensor fails to be ON within 2000ms after the swing arm starts to move to its
HP.
Check on operation of the stack delivery motor swing
mechanism, Replace the swing cam HP sensor (SR7) ,
Replace the swing cam motor (M5)
*** 0002 The HP sensor fails to be OFF within 1000ms after the swing arm starts to move from
its HP.
**** 0001 The HP sensor fails to be OFF after the swing motor rotates for a specific period of time. Replace the swing HP sensor (PI35) , Replace the
swing motor (M36)
**** 0002 The HP sensor fails to be ON after the swing motor rotates for a specific period of time.
E537 *** Front alignment error / **** Rear alignment error
Code Main Cause/Detail of Detection Countermeasures