Canon iR C3380 series, Service Manual

Page: 529 / 610

Chapter 17
17-45
11. SYSTEM
T-17-52
LBL-PRNT Prints service label.
Operation method
1) Place A4/LTR paper in the manual feed tray.
2) Select this item.
3) Press the OK key to print the label.
Reference:
Printing takes about 15 seconds to start.
1
D-PRINT Printing out service mode (DISPLAY)
Procedure
1) Select this mode.
2) Press OK to print out.
Reference:
Only DISPLAY items are printed out. (Items of P-PRINT/LBL-PRINT/HIST-PRINT and ALARM are excluded.)
1
ENV-PRT Outputting logs of inside machine temperature and humidity/fixing roller surface temperature
Procedure
1) Select this mode.
2) Press OK to output logs of inside machine temperature and humidity/fixing roller surface temperature.
Reference:
This mode is to output logs of [inside temperature(deg C)/humidity(%)/fixing roller surface (center) temperature (deg
C)] variations using signals of the attached temperature/humidity (environmental) sensor and fixing thermistor (main).
(Max. 100 records)
1
PJH-P-1 Prints print job history with detailed information (for 100 jobs).
Prints print job history with detailed information for last 100 jobs stored in copier main unit.
1
PJH-P-2 Prints print job history with detailed information (for all jobs).
Prints print job history with detailed information for all jobs stored in copier main unit.
1
TRS-DATA - TRS-DATA (Moves the data received in memory to the BOX.)
1) Select this item.
2) Press the OK key to start printing.
1
COPIER>FUNCTION>SYSTEM
Sub item Description level.
DOWNLOAD Switches to download mode.
Operation method
1) Select this item.
2) Press OK to enter download mode and have the copier wait for commands (wait for connection). ("STNDBY" is now
displayed, next to the DOWNLOAD sub-items.)
3) Use the service support tool to start downloading. ("CONNECTED"is displayed during communication with the PC.)
4) When communication ends, "HOLD"is displayed. (The power can be turned off when "HOLD"is displayed.)
1
CHK-TYPE Used to specify partition number when performing HD-CHECK or HD-CLEAR.
Operation method
1) Select this item.
2) Use the numeric keypad to select the desired partition number.
0: Check and restore all bad sectors on hard disk
1: Image storage area
2: General-purpose file storage area
3: PDL file storage area
4: Firmware storage area
- General-purpose files include user-set data, log data, PDL spool data, and management information for image data.
3) Press the OK key.
1
HD-CHECK Use it to check the entire HD and perform recovery.
Operation method
set '0' to the following: COPIER>FUNCTION>SYSTEM>CHK-TYPE
1) Select this item.
2) Press the OK key.
1
HD-CLEAR Initializes partition specified by CHK-TYPE item.
Attention:
- The following must be kept in mind and the user must be properly informed of the fact when using CHECK-TYPE:
0: entire HDD -> no operation occurs (to initialize, use the SST)
1: image storage area -> removes image data
2: general-purpose file area (user settings data, various log data, PDL spool data, image data control information) ->
initializes files
3: PDL-related file storage area -> removes font data, requiring re-installation
4: firmware, address book, filter storage area -> no operation occurs (to initialize, use the SST)
Operation method
1) Select this item.
2) Press the OK key.
Attention:
If you perform <HD-CLEAR> after selecting 1 (image storage area) or 3 (PDL file storage area) for the <CHK-TYPE>
item, the initialization process is performed after the power is turned OFF/ON.
The initialization process takes about 5 minutes. A progress bar slowly advances to indicate the progress during this time.
Never turn the power OFF during this time.
1
COPIER>FUNCTION>MISC-P
Sub item Description level.