Canon imagePROGRAF IPF9000S, Troubleshooting Manual

Page: 47 / 184

Chapter 2 Indexes by Case
2-35
Panel display
Code
(last 4
digits)
Large LCD
Small LCD
1
Small
LCD 2
Explanation/Detection sequence
Remedial Action
(
★
: Reference fault
isolation procedure
or tool)
2E0B Cassette printing
is selected.
Press Load/Eject
and
remove manually
loaded sheets.
Sheets
Loaded
Press
↓
To Eject
Cassette
Selectd
Load
Papr in
Cas
Paper mismatch (cut sheet)
Print data having a cassette print
specification has been received at the
completion of manual feed paper pickup.
Check the paper
that is actually
loaded on the
paper and the
paper feed
setting of the
driver.
Manual printing
is selected, but a
roll is loaded.
Press Load/Eject
and
remove the roll.
Sheet printing
is selected, but
a roll is loaded.
Stop Printing
2E0C
Sheet printing
is selected, but
a roll is loaded.
Tray
Selected
Press OK
Paper mismatch (cut sheet)
① Print data having a manual feed print
specification has been received at the
completion of roll paper pickup.
②
Print data having a manual feed print
specification has been received when
there is roll paper printout.
③
Cut sheet data has been received when
the media take-up unit is in use.
Check the paper
that is actually
loaded on the
paper and the
paper feed setting
of the driver.
2E0E No Roll Feed Unit.
Turn printer off
and install roll
feed unit.
Roll P
Unit
Please
Check
Power
On
Again
Roll paper unit not installed
The unit has received print data having a roll
paper print specification when it had started
without a roll unit being connected to it.
① Check the roll
unit, and
remove, install
or replace the
roll unit.
②
Check IO mode
(roll unit
detection).
2E0F Top cover is open.
Turn off printer,
wait a while, and
turn it on again.
Top Cover
Please
Close
Top
Cover
Open
Close
Top
Cover
The top cover is abnormally open. Check the cover.
Check the sensor
(IO mode).
2E10 Ink tank cover
is open.
Turn off printer,
wait a while, and
turn it on again.
Ink Tank
Cover
Close
Please
Tank
Cover
Open
Close
Please
Ink tank cover error open (continued use
allowed)
The ink tank cover opened while performing
any operation, such as printing and
suctioning.
Close the ink tank
cover.
Check the sensor
(IO mode).
2E11 Carriage Cover is
open.
Carriage cover open error
A carriage cover open has been detected.
Close the
carriage cover.
Check the sensor
(IO mode).
2E12 Rel lever is in
wrong position.
Turn off printer,
wait, then
turn on again.
Faulty release lever
The state of the release lever up (released)
has been detected.
Push down the
release lever.
Check the
sensor.
Wrong paper size.
Check paper size
setting on computer.
Online: Print
Stop: Stop Printing
PaprSiz
Mismatch
Prnt:Pres
sOnline
Loaded
Papr Diff
From
Spfd
Size
2E14
Wrong paper size.
Check paper size
setting in driver.
Online: Print
Stop: Stop Printing
Driver:
Chk Papr
Size
Setting
Loaded
Papr Diff
From
Spfd
Size
Paper mismatch (size or width)
The paper size specified for the [Print to
meet the paper width] setting of the driver on
receiving print data and the width of the roll
paper actually fed did not match.
Check the paper
that is actually
loaded on the
printer and the
paper size setting
of the driver.
Go to ★ 2010
（ P3-12 ）