Canon imagePROGRAF IPF9000S, Troubleshooting Manual

Page: 27 / 184

Chapter 2 Indexes by Case
2-15
Panel display
Code
(last 4
digits)
Large LCD
Small
LCD 1
Small
LCD 2
Explanation/Detection sequence
Remedial Action
(
★
: Reference fault
isolation procedure
or tool)
Paper not aligned
with right guide.
Press OK and
then reload the
roll paper.
201A
Paper not aligned
with right guide.
Push the release
lever back, then
reload the paper.
When loading cut sheet, paper (right) side
detection was failed.
The error is
cleared by
releasing the
release lever. After
that, load paper to
the correct
position.
201B Roll paper is not
securely in contact
with roll holder.
Press OK, then
re-attach the roll
paper.
When loading roll paper, paper (right) side
detection was failed.
Paper is ejected
automatically, and
by pressing the
[OK] button the
error is cleared.
After that, load
paper to the
correct position.
201C Paper jam
Push the release
lever back.
While printing, paper width was detected to
have fluctuated beyond the predefined value.
By releasing the
release lever,
move to the
loading sequence,
and load paper to
the correct
position.
201D Paper jam
Remove the paper
after cutting at the
top of feed slot. Push
the release
lever back.
While printing, paper width was detected to
have fluctuated beyond the predefined value.
① Cut the paper
near the feed
slot, and remove
the paper.
②
Release the
release lever,
and load the
paper to the
correct position.
201E Media Type not
compatible with
cassette.
Check Media Type.
Stop: Stop Printing
Media
Check
Please
Cancel
Cas
Cannot
Feed
Please
Check
Paper mismatch (cut sheet)
Cassette pickup has been specified for
paper that does not support cassette pickup.
Check the
cassette pick-up
setting/paper
type.