Troubleshooting Guide
2-2
Panel display
Code
(last 4
digits)
Large LCD
Small
LCD 1
Small
LCD 2
Explanation/Detection sequence
Remedial Action
(
★
: Reference fault
isolation procedure
or tool)
- Sheet
printing
is selected.
Paper mismatch (cut sheet)
No cassette paper has been loaded when
data having a cut sheet specification is
received.
(Paper type /size not determined)
Load cut sheet.
-
Paper Pos Wrong
Paper
Pos
Wrong
Invalid paper loading position
Paper is invalidly positioned on the platen.
Go to
★
2010
(P3-12).
-
Turn on the media
take-up unit.
Printing has started with the media take-up
unit setting of [Use] and with the rewinder
switched off.
Switch on the
rewinder.
*A measure for a
third-party
rewinder that is
not connected
to the main unit.
- Media
take-up
unit
ready.
Online: Print
Stop: Stop Printing
Rewinder use has been set to [Do not use]
at the start of printing when the rewinder is
active.
①
Press the
[Online] button
to set the
rewinder use
setting to force
[Use] and print.
②
Press the
[Stop] key to
cancel printing.
Feed
Limit..
-
End of paper feed.
Cannot feed
paper more.
Forced feed limit
Paper being manually fed in the return
direction (back-feeding) has reached the
pinch roller position.
The message
clears
automatically 2
seconds later.
Check the PE
sensor (IO
mode).
- Close
Ink
Tank
Cover
Ink tank cover open while printing
On a model having a subtank, the ink tank
cover opened while printing. (Printing is
allowed to continue.)
The message
clears when the
ink tank cover is
closed.
Check the sensor
(IO mode).
-
The roll feed unit
is loose. Push it
all the way in.
The roll unit has been pulled out during
standby or printing on the lower roll paper or
cut sheet A3 or less.
Close the roll unit.
-
Prepare for parts
replacement.
Call for service.
Consuma
bles Low
Durable parts replacement due soon
Any of the parts counters has reached
warning level 1.
- Parts
replacement
time has passed.
Call for service.
Repl
Consuma
bles
Durable parts replacement due soon
Any of the parts counters has reached
warning level 2.
Check the parts
counter and
prepare the target
unit or Refresh
Service Kit.
Initialize the parts
counter for the
target unit after the
replacement.
Summary of Contents for imagePROGRAF IPF9000S
