Canon imagePROGRAF IPF9000S, Troubleshooting Manual

Page: 155 / 184

Chapter 6 Miscellaneous Information
5-1
1. How to interpret Print Inf
*Print Inf is updated each time the printer is switched on and off.
■
Case of iPF700
CLEAR
INK CONSUME:0 CUTTER EXC.:0 MTC EXC.:0 HEAD EXC.:0
UNIT A EXC.:0 UNIT D EXC.:0 UNIT F EXC.:0 UNIT H EXC.:0 UNIT K EXC.:0
UNIT M EXC.:0
FACTORY CNT.:1
EXCHANGE
CUTTER EXC.:9 MTC EXC.:4 HEAD EXC.:6 BOARD EXC.(M/B):0
UNIT A EXC.:0 UNIT D EXC.:0 UNIT F EXC.:0 UNIT H EXC.:0 UNIT K EXC.:0
UNIT M EXC.:0
DETAIL-CNT
MOVE PRINTER : 0 MEDIACONFIG-CNT : 5
N-INKCHK : C:0 M:0 Y:0 MBK:0 MBK2:0 BK:0
Canon imagePROGRAF iPF700 PRINT INF
Firm:01.31 Boot:01.01 MIT:2.16 S/N:ACY00535
SYSTEM
TYPE:ACY00535 36 0 TMP:28 SIZE_LF: 0.0 SIZE_CR: 914.7
HEAD S/N:483B0000 HEAD LOT:166K23B0
INK
C :32 M :2 Y :27 MBK :19 MBK2:19 BK :19
WARNING
01:01800500-1010 02:01800500-1010 03:01810102-1002 04:01810102-1002 05:01061000-1021
06:01061000-1021 07:01810102-1002 08:01810102-1002 09:01810102-1002 10:01810102-1002
11:01061000-1021 12:01800500-1010 13:01800500-1010 14:01800500-1010 15:01800500-1010
16:01810106-1006 17:01810106-1006 18:01810106-1006 19:01810106-1006 20:01810106-1006
ERROR
01:03031000-2F38 02:03016000-2010 03:03810206-2596 04:03810206-2586 05:03810206-2586
06:03810206-2586 07:03810106-2507 08:03810106-2507 09:03810106-2507 10:03063000-2E08
11:03060A00-2E1B 12:03016000-2010 13:03060A00-2E1B 14:03016000-2010 15:03063000-2E08
16:03060A00-2E1B 17:03063000-2E08 18:03063000-2E08 19:03010000-200D 20:03010000-200D
INK CHK: C:0 M:0 Y:0 MBK:0 MBK2:0 BK:0
COUNTER
PRINTER
LIFE TTL:22505 LIFE ROLL:22502 LIFE CUTSHEET:3
LIFE A:11440 B:9815 C:992 D:258 E:0 F:0
POWER ON:2019 CUTTER:1531 WIPE:1163 W-INK:33%
CARRIAGE
PRINT:261 DRIVE:44 CR COUNT:119067 CR DIST.:494227 PRINT COUNT:3102
PURGE
CLN-A : 1:45 2:1 3:1 6:15 7:1 10:0 11:10 15:0 16:124 17:0 TTL:197
CLN-M : 1:8 4:2 5:0 6:10 TTL:20
Warning and error
histories (latest 20
occurrences)
Remaining ink detection OFF execution history
Cumulative print counts in environments A to F
(all counts measured in terms of A4 sheets)
Cumulative power-on time (h)/number of
times of cutter operation/number of times of
wiping/remaining MTC
Cumulative print time (h)/cumulative CR drive time (h)/
cumulative CR scan count (scans)/cumulative CR scan
distance (reading x 210 mm)/cumulative capping count
Cleaning count (A: automatic/M: manual)
1: Normal suction (equivalent to Cleaning A) 2: Ink level
adjustment 3: Initial filling 4: Ink drainage on head
replacement 5: Ink drainage on shipping 6: Normal
suction (high) (equivalent to Cleaning B) 7: Aging 8:
Flushing 10. Ink filling on secondary shipping 11: Ink
filling after head replacement 15: Dot count low
suction 16: Precipitated ink agitation 17: Low suction
Number of days elapsed since ink tanks
were mounted
Factory mode usage count
MCT media registration count
Secondary shipping count
Refill ink loading history
0: No loading history/1: Loading history exists
Replacement counts
Cutter replacement count/maintenance cartridge
replacement count/head replacement count/PCB
replacement count/replacement counts y unit (A to V)
Device address/model (36-inch machine)/LF
type (0: old/1: new)/ambient
temperature/present paper size
Head serial number and lot number
Clear counts
Ink interval usages/cutter replacement
count/MC replacement count/head (R)
replacement count/head (L) replacement
count (F-models)/replacement counts by
unit (A to V)