manualshive.com logo in svg

Canon Colorado 1650, Operation Manual

Share
Download
Canon Colorado 1650 Operation Manual Download Page 48

11.

Give the media a new [Media Type Name] and click on [Ok]. The window closes.

NOTE

Check that the media type name is changed. Default it should be the same as the media
profile name. You can also choose a different media type name, as long as it is unique.
Also check all the other settings.

12.

Click on the 'Next' icon to follow the steps.

13.

You can select the 

print mode

 under [Add/ Edit Modes]. For more information, see 

Select a print

mode on page 75

.

14.

You can change the specific print mode settings under [Basic Print Mode Settings].

NOTE

Fill in the same name as the selected print mode to avoid confusion.

15.

Click on [Mode options]. A new window opens.

16.

You can change the rest of the 

media settings

. For more information, see 

Change the media

settings on page 65

.

17.

Click on [Ok]. The window closes.

18.

Finish all the steps to create the media profile.

Copy an existing media profile and edit it in ONYX

48

Chapter 4 - Handle the media

Summary of Contents for Colorado 1650

































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands