manualshive.com logo in svg

Canon Colorado 1650, Operation Manual

Share
Download
Canon Colorado 1650 Operation Manual Download Page 177

Action

Procedure

Vacuum the chiller.

Vacuum the chiller and check the fluid level (first design)
on page 237

 Vacuum the chiller

Clean the ink unit.

Clean the ink unit on page 257

 Clean the ink unit

The printer performs a purge and
wipe to clean the nozzles.

Video: 

 Clean the nozzles

You can select the option [Automatic nozzle optimiza-
tion].
A test pattern will be printed that will be checked by the
system to obtain the best print quality.
Video: 

 Automatic nozzle optimization

For more information on how to start automatic, manual and periodic maintenance, see 

Start

automatic maintenance on page 178

, 

Start manual maintenance on page 180

, 

Start periodic

maintenance on page 182

.

Clean the nozzles by purge and wipe

In all three maintenance procedures the nozzles are cleaned by a purge and wipe action. During
the purge actions every nozzle is refilled with new ink. The old ink including any pollution will be
pushed out to the printhead nozzle plate. Next a wiper removes the ink including the nozzle
pollution from the nozzle plate. This results in an optimally cleaned printhead.

Automatic nozzle optimization

In all maintenance procedures you can select the option [Automatic nozzle optimization].

During printing the system uses a mechanism called PAINt, to check if all nozzles are functioning.
If a nozzle is detected as fail, PAINt will compensate this failing nozzle by a good working nozzle.
PAINt can detect the majority of the causes for a failing nozzle during the print.

When you enable [Automatic nozzle optimization] the printer will create a test print on which
each individual nozzle will print a pattern. A camera will scan the printed pattern. If the camera
detects a missing pattern and PAINt did not detect this nozzle as failing, the nozzle will be
switched off permanently. The failing nozzle is compensated by another nozzle for all print jobs,
which results in an optimum print quality.

Use a smooth, white, opaque, non-reflective media when you select Automatic nozzle
optimization.

Guidelines to maintain the print quality

Chapter 6 - Maintain the system

177

Summary of Contents for Colorado 1650

































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands