manualshive.com logo in svg

Canon Colorado 1650, Operation Manual

Share
Download
Canon Colorado 1650 Operation Manual Download Page 258

4.

Take the empty bottle out of the slot.

5.

Dispose the bottle as chemical waste according to local regulations.
If preferred and possible, you can repeat the steps to take out all bottles.

6.

Take a lint free cloth and clean the indicated areas surrounding the slots until all residue ink is
gone.
If necessary, dampen a swab with the cleaning liquid to remove any remaining ink.

7.

When all residue ink is removed, dispose the gloves and cloths as chemical waste according to
local regulations.

Result

If preferred and possible, you can place new bottles and refill ink. The order of the bottles from
left to right is YCMK. For more information, see 

Refill ink on page 202

.

Clean the ink unit

258

Chapter 6 - Maintain the system

Summary of Contents for Colorado 1650

































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands