Canon Colorado 1650, Operation Manual

Page: 70 / 384

Media settings Description
[Printer platen
temperature] Controls the temperature of the platen. Generally there is no need to change
this settings. Therefore recommended to keep this setting as defined in the
media profile, and only adjust after consulting with an application specialist.
[Precure power] Controls the curing intensity of the LED for the first part of the curing zone.
Default value is 0. Tune by decreasing or increasing the setting and mini-
mize gloss banding, especially in dark areas. When you turn the [Precure
power ] completely off ink adhesion can improve, but this can result in gloss
banding. The LED is off when the value is set to -5. Tune with small steps of
1 or 2 at a time.
CAUTION
Changing the curing settings can result in insufficient curing of
the UV-ink layer. When you have changed the settings, wear Col‐
orado 1650 approved gloves the first time you handle the printed
output to prevent any possible contact with uncured ink.
IMPORTANT
Changing the curing settings can result in insufficient curing of the
UV-ink layer. Especially in combination with the [Moist protection]
setting there is a risk the printer can get polluted. When the ma-
chine is polluted make sure you clean it or call your local service
representative.
4
Change the media settings
70 Chapter 4 - Handle the media