manualshive.com logo in svg

Canon Colorado 1650, Operation Manual

Share
Download
Canon Colorado 1650 Operation Manual Download Page 2

Copyright and Trademarks

Copyright

Copyright 2020 - 2022 Canon Production Printing.

No part of this publication may be copied, modified, reproduced or transmitted in any form or by
any means, electronic, manual or otherwise, without the prior written permission of Canon
Production Printing. Illustrations and printer output images are simulated and do not necessarily
apply to products and services offered in each local market. The content of this publication
should neither be construed as any guarantee or warranty with regard to specific properties or
specifications nor of technical performance or suitability for particular applications. The content
of this publication may be subject to changes from time to time without notice.

CANON PRODUCTION PRINTING SHALL NOT BE LIABLE FOR ANY DIRECT, INDIRECT OR
CONSEQUENTIAL DAMAGES OF ANY NATURE, OR LOSSES OR EXPENSES RESULTING FROM
THE USE OF THE CONTENTS OF THIS PUBLICATION.

Language

Original instructions that are in American English.

Trademarks

Canon is a registered trademark of Canon Inc. Colorado is a trademark or registered trademark of
Canon Production Printing Netherlands B.V.

Windows are trademarks or registered trademarks of Microsoft Corp. incorporated in the United
States and/or other countries.

All other trademarks are the property of their respective owners and hereby acknowledged.

Edition 2022-09

Software version 2.5.1

US

Summary of Contents for Colorado 1650

































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands