manualshive.com logo in svg

Canon Colorado 1650, Operation Manual

Share
Download
Canon Colorado 1650 Operation Manual Download Page 280

Configure time synchronization

Introduction

You can enable the time synchronization to connect the Colorado 1650 to a certified time server.
Then, the printer is set automatically on the correct date and time.

Before you begin

Ask your IT administrator for the name of the NTP server the printer has to connect to for time
synchronization. The default value is [time.windows.com].

Procedure

1.

Open the settings editor.

2.

Click on [Preferences].

3.

Click on the value next to [NTP client]. A window opens.

Configure time synchronization

280

Chapter 8 - Configure the network and security settings

Summary of Contents for Colorado 1650

































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands