Canon Colorado 1650, Operation Manual

Page: 71 / 384

Media settings Description
[Throughcure/
Postcure power] Controls the curing intensity of the LED for the subsequent part of the curing
zone. Default value is 0. Increase to get rid of smudges (due to rubbing) or
not fully cured ink. Decrease to minimize the appearance of a white haze on
dark areas. Decrease to limit heating of the media. The LED cannot be
turned off.
CAUTION
Changing the curing settings can result in insufficient curing of
the UV-ink layer. When you have changed the settings, wear Col‐
orado 1650 approved gloves the first time you handle the printed
output to prevent any possible contact with uncured ink.
IMPORTANT
Changing the curing settings can result in insufficient curing of the
UV-ink layer. Especially in combination with the [Moist protection]
setting there is a risk the printer can get polluted. When the ma-
chine is polluted make sure you clean it or call your local service
representative.
Smudging
[Pincure power] Controls the curing intensity of the LED for matte print modes. Default value
is 0. Increase or decrease for minor adjustment of the gloss value, for re-
spectively lower or higher gloss value. Decrease to lower the heat load on
sensitive media. Decrease to diminish eventual visibility of print surface suc-
tion holes in case of very thin media. The LED cannot be turned off.
CAUTION
Changing the curing settings can result in insufficient curing of
the UV-ink layer. When you have changed the settings, wear Col‐
orado 1650 approved gloves the first time you handle the printed
output to prevent any possible contact with uncured ink.
IMPORTANT
Changing the curing settings can result in insufficient curing of the
UV-ink layer. Especially in combination with the [Moist protection]
setting there is a risk the printer can get polluted. When the ma-
chine is polluted make sure you clean it or call your local service
representative.
4
Change the media settings
Chapter 4 - Handle the media 71