Canon Colorado 1650, Operation Manual

Page: 75 / 384

Select a print mode
Introduction
You can select a print mode that best suits your application. Choose a gloss, matte or mixed
matte/gloss finish and select your print mode in the RIP software.
The location of the print modes differs, depending on the RIP you are using. For more
information, see
Manage media profiles in ONYX on page 40 , Manage media profiles in Caldera
on page 51 .
Print modes
NOTE
The available print modes can differ, depending on the media type configuration in the RIP.
Print mode Passes
m
2
/hr ft
2
/hr
[Max speed] 1 159 1709
[High speed] 1 114 1225
[Speed] 2 80 860
[Production] 2 57 613
[High quality] 4 40 430
[Superior] 6 27 290
[Specialty] 8 20 215
Gloss print modes
Print mode Passes
m
2
/hr ft
2
/hr
[Matte high speed] 3 46 495
[Matte speed] 4 38 409
[Matte production] 4 31 333
[Matte quality] 6 27 290
[Matte specialty] 8 20 215
[Backlit] 8 20 215
[Backlit density] 14 10 108
Matte print modes
Print mode Passes
m
2
/hr ft
2
/hr
[FLXfinish
+
]*
14 7 75
Mixed Matte/Gloss print mode
* FLXfinish
+
has 6 passes for gloss and 8 for matte.
Select a print mode
Chapter 4 - Handle the media 75