Can-Am Spyder RT 2019, Operator'S Manual

Page: 20 / 187

SECONDARY CONTROLS
3) Engine Stop Switch
The engine stop switch is near the right
handgrip.
rmo2010-001-031_b
1. Engine stop switch
The switch has two positions and must
be set to the run position before you
can start the engine. It allows you to
stop the engine anytime without re-
moving your hand from the handlebar.
4) Hazard Warning Switch
The hazard warning switch is near the
right handgrip.
rmo2010-001-031_c
1. Hazard warning switch
Push the button to turn on the hazard
warning lights.
5) Cruise Control Switch
The cruise control switch is near the
right handgrip.
rmo2010-001-031_d
1. Cruise control switch
The switch is a multifunction switch.
It allows to activate, set and stop the
function of the cruise control.
Cruise Control
WARNING
It is not recommended to use
the cruise control when towing
a trailer.
When set, the cruise control allows to
maintain a steady speed while riding
the vehicle. It will increase or reduce
engine speed as necessary.
NOTE: The vehicle torque may vary
slightly depending on the road condi-
tions such as the wind, going downhill
or uphill.
The cruise control is designed to be
used for prolonged drives on low traf-
fic highways. Never ride the vehicle
with the cruise control activated in
city streets, winding roads, in adverse
weather or in any circumstances when
you need the throttle control.
Cruise Control Limitations
The cruise control is not an automatic
pilot, it will not drive the vehicle.
The cruise control is not aware of what
is going on the road and it does not
steer or apply the brakes for you.
18
______________